Item FL display Key operation
Mode name Description Remote controller
Audio pattern output The audio pattern
stored in the internal
memory is output
(1kHz-18dB).
Initialization mode
(Interlace)
[2] [3] while in service
Audio 44.1kHz / 48kHz
switched.
[2] [4] while in white
*48k 44k Toggle
HDD READ
inspection
Perform a complete
read inspection of the
HDD.
When the HDD is OK
If the HDD is negative,
the OK section will read
[NG].
[3] [1] in the service mode.
RAM drive last error RAM drive error code
display.
*For details about the
drive error code, refer
to the manual for the
specific RAM drive.
[4] [2] while in service
Laser use time
display
To check laser use
time of drive
[4] [1] while in service
Laser error count The number of times
that a laser error has
occured due to a
defective disc or
defective drive is
counted and displayed.
[4] [3] while in service
33