8.5. The Front (L) and (R) P.C.B.
1. Remove the 2 screws and remove the Front Angle.
2. Remove the 4 screws (A) and remove the Front (R) P.C.B.
3. Remove the 2 screws (B) with Earth plate and remove the Front (L)
P.C.B.
8.6. The Rear panel
1. Remove the Fan Motor connector.
2. Remove the 5 screws (A) and 1screw (B).
3. Remove the 2 tabs and remove the Rear panel.
18