Each buttons
name
Functions
FRAME (Reverse/
Forward)
To set frame advance.
POSITION
MEMORY
To memorize STOP position for
playing back again.
* STOP position is erased by
turning power off and openning
tray.
MARKER (DVD-RAM/-R)To put marker for
making chapter.
AV LINK To playback on the DVD and
select AV1 mode on the TV
automatically.
* Scart cable must be
connected with TV.
DISPLAY To select disc,playback,picture
& sound status.
OPEN/CLOSE To open or close tray.
SETUP To display SETUP menu.
DUBBING To dub recorded program at
HDD to DVD-RAM/-R during
playback.
EXT LINK To set EXT LINK mode to
record automatically by
detecting signal from external
equipment.
10.2. Special modes at a glance
10.2.1. Service modes
Service mode setting: While the power is off, press TIME SLIP, STOP and OPEN / CLOSE
simultaneously for five seconds.
30
To Next Page
Loading...
