44
RQT7458
Convenient functions
Changing the unit’s settings
Refer to the control reference on page 40.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select “SETUP”
and press [ENTER].
3 Press [3, 4] to select “Tuning” and
press [1].
You can add or delete channels, or change programme positions.
4 Press [3, 4] to select “Manual” and
press [ENTER].
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press [A].
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press [B].
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and press
[C].
2 Press [3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [ENTER].
[Note]
If Preset Download (➡ page 11) has been performed, only deletion
of the programme position can be performed.
∫ To change the tuning settings for individual
programme position
5 Press [3, 4, 2, 1]
to select a
programme position
and press [ENTER].
Press [3, 4] to select an item and press [1].
Tuning
Manual
SETUP
Others
Tuning
Manual
Auto-Setup Restart
Download
Manual Tuning
Pos
Name
Ch
ENTER
RETURN
SELECT
Pos
Name
Ch
B CA
Delete
Add
Move
1 BBC 1 22
2 BBC 2 23
3 ITV 24
4 CH4
25
5 CH5 26
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Pos To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [ENTER].
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [ENTER].
If the station name needs a blank space, select
the blank between “Z” and “¢”.
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[ENTER].
NICAM To select the type of sound to be recorded
Press [3, 4] to select “Auto” and press [ENTER].
≥Select “Off” if you want to record the normal
(mono) sound during a stereo, bilingual or
NICAM broadcast, or if the stereo sound is
distorted due to inferior reception conditions.
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter the
number and press [ENTER].
≥To find the correct title page for the station, refer
to its Teletext TV guide.
≥The unit’s clock must be set correctly.
Pos
Name
Channel
Title Page
1
301
4
Auto
RETURN : leave
Manual
Tuning
BBC
SELECT
RETURN
NICAM
7458en.book44ページ２００４年５月１４日 金曜日 午前１０時４７分
To Next Page
Loading...
