45
RQT7458
Convenient functions
You can restart auto channel setting if Preset Download or Auto-
Setup (➡ page 11, 12) fails for some reason.
∫ Auto-Setup Restart
4 Press [3, 4] to select “Auto-Setup
Restart” and press [ENTER].
5 Press [2, 1] to select “Yes” and
press [ENTER].
Auto-Setup starts.
∫ Download
4 Press [3, 4] to select “Download”
and press [ENTER].
5 Press [2, 1] to select “Yes” and
press [ENTER].
Download starts.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
Change the settings to match the equipment you are connecting
with, or to match the title when there are both PAL and NTSC titles
on the HDD.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4, 2, 1] to select “SETUP”
and press [ENTER].
3 Press [3, 4] to select “Connection”
and press [1].
4 Press [3, 4] to select “TV System”
and press [ENTER].
5 Press [3, 4] to select the TV system
and press [ENTER].
≥PAL (factory preset)
–Select when connecting to a PAL or Multi-system
television. Titles recorded using NTSC are played as PAL
60.
–Select to record television programmes and PAL input from
other equipment.
–[HDD] Select when playing a PAL input title recorded on the
HDD.
≥NTSC
–Select when connecting to a NTSC television. Television
programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
–[HDD] Select when playing a NTSC input title recorded on
the HDD.
6 Press [2, 1] to select “Yes” and
press [ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
∫ To change the setting all at once (PAL!#NTSC)
While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the
main unit for 5 or more seconds.
Auto-Setup Restart, Download
TV System
SETUP
Others
Disc
Picture
Sound
Display
Tuning
TV System
PAL
NTSC
Connection
SELECT
ENTER
RETURN
7458en.book45ページ２００４年５月１４日 金曜日 午前１０時４７分
To Next Page
Loading...
