Panasonic DMR-EH80V

56
Programming recordings with ShowView
By entering a ShowView number, the TIMER-controlled recording is easy to set.
The appropriate codes can be found in newspapers and TV guides.
!
Press ShowView.
!
Enter the ShowView number using the number buttons.
Use to delete a number.
!
Confirm the ShowView number with ENTER.
!
!
!
If [ ] is displayed under Name, use to select the desired programme position.
Use to select the desired drive (HDD, DVD).
!
Use to select the option. Use to change the option.
Name, Date, Start and Stop can also be entered using the numeric buttons.
If you want to enter the programme name, use to select
[Programme Name] and confirm with ENTER.
!
Once you have performed all changes, save the programme with ENTER.
Press TIMER to switch the unit to timer standby mode.
The symbol lights up in the unit display.
!
To cancel or pause the recording, press TIMER again.
[Name], [Date], [Start], [Stop], [Drive], [Mode], [VPS/PDC], [RENEW]
66
ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under
licence from Gemstar Development Corporation.
ShowView
ShowView
8
5 3
4 2
Enter ShowView Number by using 0-9 key.
Remain HDD 72:50 LP DVD 3:59 LP
12:09:37 18. 2. THU
TIMER
RECORDING
ENTER
RETURN
CANCEL
Date
Start Stop
Mode
Name
Programme Name
Press ENTER to store the programme.
1 ARD
Remain HDD 72:50 LP DVD 3:59 LP
12:09:37 18. 2. THU
VPS
PDC
Drive
18. 2. THU 7:50 8:50 SP ONHDD
No.
0 9
VPS
PDC
Nr
Name
Datum Mode
Stop
Start
TIMER
RECORDING
12:09:37 18. 2. THU
VPS
PDC
No. Name Date Mode Stop
Disc
space
Start
03 ZDF
18. 2. THU
11:30
ON
10:30
SP
!
ENTER
RETURN
CANCEL
Remain HDD 72:50 LP DVD 3:59 LP
New Timer Programme
You can programme up to 32 programmes per month in advance.
RAM
-R
()
-RW V +R
HDD
49-50
55
TIMER-controlled recordings
The TIMER RECORDING menu is displayed.
Please take notice of the recording information.
Drive