Getting started
SQT0816
14
Connection
To connect and register the USB HDD
(optional)
Refer to “Registering the external HDD
(USB HDD)”. (> 58)
About HDMI cable
If you use an optional HDMI cable, use the High
Speed HDMI cables. Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use Panasonic’s
HDMI cable.
When outputting 1080p signal or 24p signal,
please use HDMI Cables 5.0 meters or less.
• VIERA Link function is possible by connecting to a TV or
amplifier/receiver compatible with VIERA Link.
• When using a TV or an amplifier/receiver that does not
display “ARC” on the HDMI terminal, it is necessary to
connect the TV and the amplifier/receiver with a digital
audio cable to enjoy the TV audio on the amplifier/receiver.
• When you do not want the audio to be output from the TV,
set “HDMI Audio Output” to “Off” (> 62, 69).
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[approx. 0.2 W (“Quick Start” is not activated
and “RF OUT ( Aerial Signal )” is set to “Off”)]
Amplifier/receiver connections
HDMI terminal
• You will not be able to view 3D programmes with
this connection if your amplifier/receiver is not
3D compatible.
DIGITAL AUDIO OUT terminal
HDMI
cable
Amplifier/
receiver
TV
HDMI cable
(supplied)
(ARC)
(ARC)
ۂ
COAXIAL IN
Amplifier/receiver
Coaxial cable
DMRHWT250GL_eng.book 14 ページ ２０１５年２月４日 水曜日 午後４時３４分
To Next Page
Loading...
