Recording
SQT0816
26
Recording TV programmes
• If a timer recording reaches its start time when all tuners
are being used for recording, the recording of one of the
programmes terminates.
• Teletext will not be recorded.
• Following contents or media cannot be played back while
recording.
- video file
- photo
- USB HDD (For data files, > 9) and USB memory
• Copying cannot be performed while recording.
• When “Automatic Standby after OTR” is set to “On” (> 72),
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
“Automatic Stop” or “Recording Time”.
• The title before conversion (the title recorded in DR mode)
will be deleted once the conversion is completed.
• Conversion will take about the same time as the recorded
duration.
• When the HDD does not have enough remaining space,
conversion will not start.
• Conversion is stopped when this unit is turned on.
Conversion will start from the beginning again once the unit
is switched to standby mode.
• When converted, audio content and subtitle will be
converted with the same settings as at the start of
recording.
Press [STATUS ].
e.g., While recording two programmes simultaneously
Press [STOP ∫].
When recording one programme:
If the following screen appears
Select “Yes”, then press [OK].
Operation during Recording
To check the recording programme
To stop recording
When recording two programmes:
If the following screen appears
1 Select the programme, then press [OK].
2 Select “Yes”, then press [OK].
Recording programme
displayed on the TV
Recording programme not displayed on the TV
Stop Recording
Yes
No
Recording of this programme is in progress.
Stop this recording ?
OK
RETURN
1
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
OK
RETURN
1
2
DMRHWT250GL_eng.book 26 ページ ２０１５年２月４日 水曜日 午後４時３４分
To Next Page
Loading...
