Getting started
SQT0816
13
Connection
• This unit cannot connect the TV that does not have the HDMI terminal.
• Keep the RF coaxial cables as far away as possible from other cables.
• The HDMI connection supports VIERA Link (> 74).
• You cannot connect this unit to DVI devices that are incompatible with HDCP.
Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio
cannot be output.)
• If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down
mixed and output as 2 channels, even if connecting with an HDMI cable.
3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• When outputting 1080p or 24p signal, please use HDMI cables 5.0 meters or less.
It is recommended that you use Panasonic’s HDMI cable.
Basic connections
TV’s rear panel
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
Cooling fan
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
(supplied)
To the aerial
Aerial cable
RF coaxial cable
(supplied)
DMRHWT250GL_eng.book 13 ページ ２０１５年２月４日 水曜日 午後４時３４分
To Next Page
Loading...
