Recording
TQBS0149
35
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
• Programmes to be recorded with Keyword recording (> 36)
are not displayed.
To confirm and edit a timer
programme
• Red: To delete a timer programme
• Green:
To resolve an overlap timer programme
- The overlapped timer recording list will
appear. (> 32)
• Yellow:
To deactivate a timer programme
- The timer icon “F” will change from red to
grey.
- Press the yellow button again to activate
timer recording standby. (The timer icon
“F” will change to red.)
• [STATUS ]: Show programme
information
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 34)
3 Press [OK].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Delete
Total 3/32
Timer Recording
HD 154:04 / UHD 77:02 DRTime Remaining
TUE 03.01.2017 8:05
Info
Keyword List
Resolve overlap
New Timer Programme
MON 13.01
MON 13.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
MON 13.01
TUE 07.01
DR
HG
DR
DR
OK
OK
Guide
Guide
Screen icons
Red: Timer recording standby is
activated.
Grey: Timer recording standby is
deactivated.
[
(Red)
Currently recording programme
A part or all of the programme will not
be recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was
not completed because of some
reason.
Auto Renewal Recording is set
(> 34).
Signal Supported Recording (> 34)
Displayed if timer recording of two
encrypted programmes is
overlapping.
(When “Recording for Encrypted
Channel” is set to “Decrypt
Recording” only) (> 82)
A part or all of the programme will not
be recorded since the encrypted
programme is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is
set.
• The timer remains set until the date
indicated below .
It may not be possible to record
because:
- there is not enough space left.
- programmes are deactivated, etc.
- the number of possible programmes
has reached its maximum. (> 20)
DMR-UBC86EN_eng.book 35 ページ ２０１７年８月８日 火曜日 午前１１時１２分
To Next Page
Loading...
