Other functions
TQBS0149
77
Other operations
[BD-RE] [ BD- R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]
1 Press [FUNCTION MENU].
2 Select “Media”, then press [OK].
[BD-RE] [ BD- R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]
This function is to name a disc.
Refer to “Entering text”. (> 78)
• The disc name is displayed in the Blu-ray Disc
Management/DVD Management window.
• [DVD-R] [DVD-RW] [+R] With a finalised disc, the
name is displayed on the Top Menu.
• [+RW] The disc name is displayed only if you
play the disc on other equipment after creating
Top Menu.
• Do not perform this operation before copying HD Video
(AVCHD) to DVD-R or DVD-R DL. (> 62)
[BD-RE] [ BD- R] [RAM]
Select “Yes”, then press [OK].
e.g.,
[BD-RE] [ BD- R] [RAM]
• Photo data (JPEG/MPO) or computer data cannot be
deleted.
[BD-RE] [RAM] [DVD-RW] [+RW]
[BD-R] [+R] (New disc only)
Formatting deletes all contents (including
computer data), and they cannot be restored.
Check carefully before proceeding.
1 Select “Yes”, then press [OK].
2 Select “Start”, then press [OK].
3 Press [OK].
[RAM] To stop formatting
Press [RETURN ].
• You can cancel formatting if it takes more than
2 minutes. The disc must be reformatted if you
do this.
• Do not disconnect the AC mains lead while formatting.
This can cause the disc unusable.
• The contents are deleted when you format a disc even if
you have set protection.
• When a disc has been formatted using this unit, it may not
be possible to use it on any other equipment.
• It will become DVD Video format when a DVD-RW recorded
in DVD Video Recording format is formatted with this unit.
• [RAM] Formatting normally takes a few minutes; however, it
may take up to a maximum of 70 minutes.
[DVD -R] [DVD-RW] [+R] [+RW]
You can select the background for DVD-Video
Top Menu.
Select the background, then press [OK].
[DVD -R] [DVD-RW] [+R] [+RW]
You can select whether to show the Top Menu
after finalising or creating Top Menu.
Select “Top Menu” or “Title 1”, then press [OK].
Top Menu:
The Top Menu appears first.
Title 1:
The disc content is played without displaying the
Top Menu.
Media management
3 Select the media, then press [OK].
4 Select the management item, then press
[OK].
• Selectable items will change depending on
the selected item and inserted media.
Disc Name
Disc Protection
• To release the protection
Repeat the same steps.
• The screen icon will be switched to “Off”.
Delete all programmes
1 Select “Yes”, then press [OK].
2 Select “Start”, then press [OK].
On
Disc Name
Delete all programmes
Disc Protection
Format Disc
Top Menu
Auto-Play Select
DMR-UBC86EN_eng.book 77 ページ 2017年8月8日 火曜日 午前11時12分