Reference
TQBS0149
94
3D video is not output correctly.
• 3D video may be output correctly by changing
the following settings:
- “Signal Format” (> 48, 3D settings during
playback)
• Check the settings of the connected TV.
• When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. (> 13)
• When “Audio Output” is set to “Off”, 3D video
may not be output correctly. (> 86)
Cannot play back videos on the USB device
smoothly.
• Use the port on the front side of this unit, which
supports USB 3.0. You may be able to improve
the performance.
No sound.
Distorted sound.
• Check the connections. (> 11)
• Check the settings of the connected TV, etc.
• Press [AUDIO] to select the audio. (> 26, 47)
• To output audio from a device connected with an
HDMI cable, set “Audio Output” to “On”.
(> 86)
Cannot change audio channel.
• You cannot change the audio channel if “Digital
Audio Output” is set to “Bitstream” (> 84)
There is no sound coming out.
• Refer to “Connection” (> 11 - 13) to check the
audio output settings suited to the connections
of your device.
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
• You cannot record to the disc by pressing the
[REC ¥] or timer recording.
• The disc is protected. (> 77)
• [DVD-R] [DVD-RW] [+R] [+RW] Since it will copy to
HDD temporarily, copying is not possible if there
is insufficient available capacity on the HDD.
• This unit cannot record/copy NTSC signals to
discs that already have PAL signal recordings.
A part or whole of a recorded programme has
been lost.
If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the programme may be
lost or the HDD may become unusable. We
cannot offer any guarantee regarding lost
programmes.
Sound
Recording, timer recording and
copying
Timer recording does not work properly.
• When is displayed on the screen. (> 35)
• If your CAM requires a PIN for timer recording,
you need to enter PIN in advance. (> 82, PIN
Entry for Decrypt Recording)
Auto Renewal Recording does not work
properly.
• The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as Video Menu is displayed
Instead, the programme will be saved as a
separate programme and that will be
overwritten.
DMR-UBC86EN_eng.book 94 ページ ２０１７年８月８日 火曜日 午前１１時１２分
To Next Page
Loading...
