66
Function
■ Network Settings
When the Parameter No. 22 (DHCP DEFAULT)
is set to “INVALID”, the Key Operator must
administer the Network settings manually.
Enter these required Network Setting: Param-
eter No. 19 (TCP/IP ADDRESS), 20 (TCP/IP
SUBNET MSK) and 21 (TCP/IP G/W ADDR.),
in the same manner as shown in the following
example.
Same procedure as
steps 2 to 5 above.
19 TCP/IP ADDRESS
Input the TCP/IP Address
Ex.: 192.168.1.100
Use the “
” key to enter a
period.
1 → 9 → 2 →
→ 1 → 6 → 8 →
→ 1 → → 1 → 0 → 0
19 TCP/IP ADDRESS
192.168.1.100
Turn the Power Switch
on the Right Side of the
machine OFF and ON.
6
1
2
10
For Example
To Next Page
Loading...
