EasyManua.ls Logo

Panasonic DP-MB350 - 5 Copier; Copy; Making a Copy

Panasonic DP-MB350
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Copier
36
5CopierCopy
5.1 Making a copy
5.1.1 Using the scanner glass
1
If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2 Set the original (page 19).
3 If necessary, change the copy settings according to
the type of document.
L To change the number of copies, see page 36.
L To select the contrast, see page 36.
L To select the resolution, see page 36.
L To select the zoom rate, see page 36.
4 {Start}
L If the copy input tray prompt (feature #471 on
page 68) is activated, select the desired
recording paper size by pressing {<} or {>}
repeatedly, then press {Start} again.
L The unit will start copying.
5 After you finish copying, press {Stop} to reset the
settings you set in step 3.
Note:
L To stop copying, see page 78.
L You can change the default operation mode (feature
#463 on page 60) and the timer before returning to
the default operation mode (feature #464 on page
60).
L If the {Fax Auto Answer} light is ON, the unit can
receive faxes automatically even when in the copy
mode.
To change the number of copies
1. Press {V} or {^} repeatedly to select Copies.
2. Enter the number of copies (up to 99).
3. {Set}
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press {V} or {^} repeatedly to select Contrast.
2. Press {<} or {>}. i {Set}
Note:
L You can hold the previous contrast setting (feature
#462 on page 60).
To select the resolution
1. Press {V} or {^} repeatedly to select
Resolution.
2. Press {<} or {>} repeatedly to select the desired
resolution.
Text/Photo: For both text and photographs.
Text: For text only.
Photo: For photographs, shaded drawings,
etc.
3. {Set}
Note:
L You can change the default resolution (feature #461
on page 67).
To select zoom rate (enlargement / reduction)
1. Press {V} or {^} repeatedly to select Zoom.
2. Press {<} or { > } repeatedly to select the zoom rate
that fits the size of your document and recording
paper.
100%
50%
200%
L You can enter the desired percentage from
25% to 400% specifically by using the dial
keys.
L Additional zoom rates can be selected according
to the recording paper size setting (feature #380
on page 59 or feature #382 on page 59).
3. {Set}
Note:
L Zoom copy is not available for the following features:
Quick ID copy feature (page 39)
Easy repeat feature (page 39)
Poster feature (page 40)
{Set}{V}{^}{<}{>}
{Copy}
{Fax Auto Answer}
{Stop}
{Start}
Feature #380/#382 setting Additional zoom rate
Letter”“A4Letter
LegalLetter
A4”“LetterA4
LegalA4
Legal

Table of Contents

Related product manuals