Panasonic DP-MB350 - Button Descriptions

1. Introduction and Installation
8
For assistance, please contact an authorized Panasonic dealer.
Finding the Controls
1.3 Button descriptions
A {Copy}
L To switch to copy mode (page 19, 36).
B {Scan}
L To switch to scan mode (page 19, 31).
C {Advance}
*1
L To switch to the basic/advance settings.
D {Menu}
L To start or exit programming.
E {Caller ID}
L To use Caller ID features (page 54).
F {Redial}{Pause}
L To redial the last number dialed. If the line is busy
when you send a fax, the unit will automatically
redial the number 1 time.
L To insert a pause during dialing.
G {Fax Auto Answer}
L To turn the auto answer setting ON/OFF (page
47).
H {Stop}
L To stop an operation or programming session.
I {Fax}
L To switch to fax mode (page 19, 42).
J {Duplex}
L To make duplex copies (page 38).
L To scan or send 2-sided originals (page 33, 43).
K {Back}
*1
L To return to the previous display.
L To erase a character/number.
L Navigator key
*1
L To select desired settings.
L To adjust the volume (page 21).
L To search for a stored item (page 45).
M {Set}
*1
L To store a setting during programming.
N {Monitor}
L To initiate dialing.
When you press {Monitor} while receiving a call,
you will be able to hear the other party, but the
other party will not be able to hear you.
O {Flash}
L To access special telephone services or for
transferring extension calls.
P {Tone}
L To change from pulse to tone temporarily during
dialing when your line has rotary/pulse service.
Q {Start}
L To copy a document (page 36).
L To scan a document (push scan) (page 31).
L To send a fax (page 42).
*1 See page 9 for details.
AB CD E F G H
IJKLMNOPQ