Panasonic DVD-S100

RQTC0147
14
Using On-Screen Menus
∫ Audio Menu ∫ Display Menu
∫ Confirming HDMI information
≥All possible outputs are displayed.
≥The current output for “Audio Stream”, “Color Space” and “Video
Format” will be underlined.
≥When “Off” is selected in “Audio Output” (➜ 16, “HDMI” menu), “– – –”
will be displayed in “Audio Stream” and “Max Channel”.
Dolby Pro
Logic
II
Dolby Pro Logic II is an advanced decoder that derives 5
channel surround (Left and Right Front, Center, Left and
Right Surround) from any stereo program material.
Off
Movie: Movie software, recorded in Dolby Surround.
Music: Stereo sources.
≥This does not work when playing multi-channel audio.
≥This does not work when audio is output from HDMI AV
OUT terminal.
≥This does not work with MP3 on DVD-RAM or DVD-R/
RW.
Night
Sound
Mode
Except [JPEG] [MPEG4] [DivX]
You can enjoy movies and music late at night because the
quieter parts of the audio are accentuated.
On ,------. Off
≥This may not work depending on the disc’s recording.
≥This does not work with MP3 on DVD-RAM or DVD-R/
RW.
≥This does not work when Dolby Pro Logic II (➜ above)
is on.
H.Bass
[DVD-VR] [DVD-V]
On ,------. Off
You can enjoy heavy bass with the speakers.
≥This is effective on 5.1 channel DVD video discs.
This is also effective on some portions of 2 channel
discs as well.
≥This may not work depending on the disc’s recording.
≥If the sound is distorted or there is noise, set to “Off”.
≥This does not work when Dolby Pro Logic II or Night
Sound Mode (➜ above) is on.
Advanced
Surround
[DVD-VR] [DVD-V] [VCD] (2 or more channels)
Enjoy a surround-like effect when using 2 front speakers
(SP) or headphones (HP) (connect the unit to equipment
that has a headphone jack).
SP 1 Natural SP 2 Enhanced
HP 1 Natural HP 2 Enhanced Off
≥When using discs recorded with surround sound, sound
seems to come from speakers on either side of you.
≥When using headphones from the connected
equipment, select “HP 1” or “HP 2”.
≥Optimum seating position is 3 to 4 times the distance
between the front left and right speakers or the width of
the TV if using the TV’s speakers.
≥Do not use in combination with surround effects on
other equipment.
≥ This does not work when Dolby Pro Logic II, Night
Sound Mode or H.Bass (➜ above) is on.
Dialogue
Enhancer
[DVD-V] (Dolby Digital, DTS, 3-channel or over, with the
dialogue recorded in the center channel)
[DivX] (Dolby Digital, 3-channel or over, with the dialogue
recorded in the center channel)
To make the dialogue in movies easier to hear
On ,------. Off
Multi Re-
master
(➜ 9, Reproducing more natural audio)
Sound
Enhancement
[DVD-VR] [DVD-V] (Discs recorded with 48 kHz only)
[DVD-A] (Discs recorded with 44.1 kHz and 48 kHz only)
[VCD]
[CD]
[WMA]
[MP3] (Disc recording is other than 8 kHz, 16 kHz or
32 kHz)
You can enjoy comfortable, analog-like sound.
On ,------. Off
≥
This does not work when Multi Re-master (➜ 9 ,
Reproducing more natural audio),
Dolby Pro Logic II ,
Night Sound Mode, H.Bass
or Advanced Surround (➜
above) is on.
≥This may not work depending on the disc’s recording.
≥This does not work with MP3 on DVD-RAM or
DVD-R/RW.
Digital
Filter
With 2 ch or 5.1 ch AUDIO OUT terminals (➜ 5, 6)
Normal: A clear timbre.
Slow: Gives music atmosphere, with softness and a
feeling of depth.
Attenuator
With 2 ch or 5.1 ch AUDIO OUT terminals (➜ 5, 6)
Switch on if sound is distorted.
On ,------. Off
Information
On ,------. Off
Subtitle
Position
0 to s60 (in 2 units)
Subtitle
Brightness
Auto, 0 to s7
4:3 Aspect
To select how to show images made for 4:3 aspect
screens on a 16:9 aspect TV.
Normal: Laterally stretches images.
Auto: The standard setting is “Shrink”. However this
automatically changes to “Zoom” with a
letterbox picture.
Shrink: Images appear in the center of the screen.
Zoom: Expands to 4:3 aspect ratio.
Just Fit Zoom
(➜ 8, Changing the zoom ratio)
Manual Zoom
(➜ 8, Changing the zoom ratio)
Bit Rate Display
Motion pictures
On ,------. Off
GUI See-through
Off On Auto (Switches on automatically
when the images appear on the display.)
GUI Brightness
s3 to r3
HDMI Status
Indicates various information when
connected with HDMI AV OUT terminal.
(➜ below Confirming HDMI information)
Quick OSD
(➜ 8, Displaying current playback
condition)
HDMI Status ----- HDMI is connected.
HDMI Information
Audio Stream
Max Channel
Color Space
Video Format
PCM/Dolby Digital/DTS
6ch
YCbCr(4:4:4)/YCbCr(4:2:2)/RGB
480p
720p/1080i/1080p
Connection status
(➜ 8, Changing soundtracks)
(➜ 13, HDMI Color Space)
(➜ 13, Video Output Mode)
Shows the maximum channel number of the connected equipment.
Using On-Screen Menus
14
RQTC0147-12.fm Page 14 Monday, July 23, 2007 6:13 PM