EasyManua.ls Logo

Panasonic DVD-S47EE

Panasonic DVD-S47EE
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RQT7553
7
Enjoying higher quality audio and video
By pressing just one button the disc type is automatically determined and
the best audio and video settings are configured.
Press [AV ENHANCER] to select “On”.
Reduce the rough noise in the background to give a greater feeling of
depth.
Press [DEPTH ENHANCER] several times to select from “0”
through “+4”.
This does not work while using Cinema1 or 2 ( page 11, Picture Mode).
[RAM] [DVD-V] (Discs recorded with 48 kHz only)
[DVD-A](Discs recorded with 44.1 kHz and 48 kHz only)
[VCD] [CD]
This feature gives you a more natural sound by adding the higher
frequency signals not recorded on the disc.
[WMA] [MP3] (Disc recording is other than 8 kHz, 16 kHz and 32 kHz)
This feature reproduces the frequencies lost during recording to give you
a sound closer to the original.
Press [MULTI RE-MASTER] to select
“1” “2” or “3”.
The actual output sampling frequency depends on “PCM Digital Output
setting in “Audio” tab ( page 12).
AV Enhancer
When AV Enhancer is on, you cannot change the settings indicated
below.
Audio settings:
Multi Re-master ( below), Advanced Surround ( page 11),
Dialogue Enhancer ( page 11)
Video settings:
Picture Mode ( page 11)
Depth Enhancer
Multi Re-master
Setting [DVD-A] [DVD-V] [CD] (LPCM/PPCM)
Type of music
Other discs
Effect level
1 High tempo (e.g., pop and rock) Light
2 Various tempos (e.g., jazz) Medium
3 Low tempo (e.g., classical) Strong
Off Off Off
The above indicated features may not work depending on the discs
recording.
AV ENHANCER
Menu
AV Enhancer On
DEPTH
ENHANCER
Depth Enhancer
0
MULTI
RE-MASTER
Menu
Multi Re-master 1
Changing the play sequences
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
While stopped, press [PLAY MODE].
Each time you press the button:
All group ([DVD-A]) > Program > Random
^-------------Off (Normal play),-----------b
Disable HighMAT disc play to use random and program play.
Select “Play as Data Disc” in Other Menu ( page 11).
All Group play
Press [1] (PLAY).
Program play (up to 32
items)
1 Press the numbered buttons to
select the items (
[WMA] [MP3] [JPEG]
then press [ENTER]).
Repeat this step to program other items.
2 Press [1] (PLAY).
Selecting all the items
(on the disc or in the title or group)
Press [ENTER] and [3 4] to select “ALL, then press [ENTER] again to
register.
Changing the program
Press [3 4] to select an item.
–To change an item, repeat step 1.
–To clear an item, press [CANCEL] (or select “Clear” and press [ENTER]).
Press [ANGLE/PAGE] to skip 8 lines at a time.
Clearing the whole program
Select “Clear all” and press [ENTER]. The whole program is also cleared
when the unit is turned off or the disc tray is opened.
Random play
1([DVD-A] [DVD-V] [WMA] [MP3] [JPEG])
Press the numbered buttons to
select a group (
[WMA] [MP3] [JPEG]
then press [ENTER]) or a title.
2 Press [1] (PLAY).
To exit the all group, program or random mode
Press [PLAY MODE] several times while stopped.
(Only when the elapsed play time can be displayed
[JPEG]: Works with all JPEG content.)
Press [REPEAT] several times to select
an item to be repeated.
All group/Program/Random play
Repeat play
PLAY MODE
All Group Playback
Press PLAY to start
Choose a title and chapter.
No. Time
Title
Play
Clear
Clear all
Chapter
1
1
Press PLAY to start
Random Playback
to select
to start
Title
Choose a title.
1
PLAY
0 ~ 9
e.g. [DVD-V]
REPEAT
Repeat Off
Menu
Enjoying higher quality audio and video/Changing the play sequences
7553En.fm7ページ2003年12月26日 金曜日 午前10時32分

Related product manuals