Why does my Panasonic DVD-S47EE DVD Player have no power?
If your Panasonic DVD Player is not getting power and automatically switches to standby mode, ensure the AC power supply cord is securely inserted into the household AC outlet. Also, when “Auto Power Off” is set to “On”, the unit automatically switches to standby after approximately 30 minutes in the stop mode. The Sleep timer may have also functioned.
How to adjust subtitles on Panasonic DVD-S47EE DVD Player?
If the subtitle position is wrong, there are no subtitles, or the subtitles overlap closed captions on discs with your Panasonic DVD Player: * Adjust the position via “Subtitle Position” in the Display Menu. * Display the subtitles. * Clear the subtitles.
Why is the picture incorrect on my Panasonic DVD-S47EE?
If you're experiencing issues with the picture quality on your Panasonic DVD Player, ensure it's directly connected to the television and not through a video cassette recorder. Try adjusting the 'TV Aspect' in the 'Video' tab or using your television to change the aspect ratio. You can also modify the '4:3 Aspect' in the Display Menu, experiment with the Zoom setting, restore the zoom ratio to a1.00, set 'Subtitle Position' in Display Menu to '0', set '4:3 Aspect' in Display Menu to 'Normal', or turn off the TV’s zoom function. If the system used on the disc doesn’t match your television, use a multi-system or NTSC television. Also, the unit and television might be using different video systems. Additionally, use the other preset aspect ratios or manual adjustment.
Why is the sound incorrect on my Panasonic DVD Player?
If your Panasonic DVD Player isn't producing any sound, try the following: Select 'Off' in 'Advanced Surround' in Audio Menu. If you experience distortion with AUDIO OUT connections, select 'On' in 'Attenuator' in Audio Menu. If you have connected a digital amplifier which does not include decoder, be sure to select 'PCM' in 'Dolby Digital', 'DTS Digital Surround' or 'MPEG§' in 'Audio' tab. If the 'D.MIX' indicator on the display goes out while playing a multi-channel DVD-Audio disc, sound will only be output from speakers specified by the disc. Also, connect with the AUDIO OUT terminal if none of the audio effects work when the unit is outputting bitstream signals from the DIGITAL AUDIO OUT terminal.
How to fix no power on Panasonic DVD Player?
If your Panasonic DVD player isn't powering on or seems to be in standby mode, make sure the AC mains lead is securely inserted into the household mains socket. Also, if “Auto Power Off” is set to “On”, the unit automatically switches to standby after approximately 30 minutes in the stop mode. The Sleep timer might also be functioning.
How to fix subtitle position on Panasonic DVD Player?
If the subtitle position is wrong or there are no subtitles on your Panasonic DVD Player, adjust the position using the ‘Subtitle Position’ option in the Display Menu. Also, make sure that the subtitles are enabled to display.
What to do if my Panasonic DVD-S47EE DVD Player says NOPLAY or NODISC?
If the Panasonic DVD Player displays error messages like “NOPLAY,” “U11,” “U15,” “H??” or “NODISC”, it could be due to several reasons: * The disc inserted is not supported by the unit. Try inserting a compatible disc. * The disc is blank. Ensure a disc with content is inserted. * The disc is dirty. Clean the disc and reinsert. * The DVD-R has not been finalized. Finalize the DVD-R before playing. If trouble occurred, turn the unit off and then back on. If the issue persists, contact a qualified service person, noting the service number.
Why does my Panasonic DVD-S47EE DVD Player say 'This disc may not be played in your region'?
If the Panasonic DVD Player shows messages like “/”, “Cannot display group xx, content xx”, “The progressive out is set to “Disable””, “This disc may not be played in your region” or no on-screen display, it could be due to: * The operation is prohibited by the unit or disc. * You are trying to display incompatible contents. * Select “Enable” in “Progressive Out (Component)” in “Video” tab. * You can only play DVD-Video if their region number is “1”, “ALL” or multiple region number including “1.” * Select “On” in “On-Screen Messages” in “Display” tab.
What to do if my Panasonic DVD Player says “NOPLAY” “U11” “U15” “H??” “NODISC”?
If your Panasonic DVD Player shows “NOPLAY”, “U11”, “U15”, “H??” or “NODISC”, it might be due to several reasons. First, ensure that you have inserted a disc that the unit is capable of playing. If the disc is dirty, wipe it clean. Also, make sure that you have correctly inserted the disc. If you inserted a DVD-R, it may need to be finalized. For trouble, turn the unit off and then back on. As an alternative, turn the unit off, disconnect the AC mains lead, and then reconnect it. If the service numbers fail to clear, note the service number and contact a qualified service person.
What to do if my Panasonic DVD Player cannot record to digital recording equipment?
If you are unable to record to digital recording equipment with your Panasonic DVD player (resulting in incorrect sound recorded), note that you cannot record WMA/MP3 files, DVDs that have protection preventing digital recording, or DVDs if the recording equipment cannot handle signals with a sampling frequency of 48 kHz. To resolve this, make the following settings: Advanced Surround: Off, PCM Digital Output: Up to 48 kHz, Dolby Digital/DTS Digital Surround/MPEG§: PCM.
General| Brand | Panasonic |
|---|---|
| Model | DVD-S47EE |
| Category | DVD Player |
| Language | English |
To Next Page