RQT7258
5
≥Select “Off” in “HDMI Audio Output” (➜ page 15, “HDMI” tab).
Turn on the television and select the appropriate video input on the television.
To change these settings later
Select “QUICK SETUP” (➜ page 15, “Others” tab).
Test by turning on the television and changing channels. Repeat the procedure until you find the code that allows correct operation.
≥If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible
with your television.
Enjoying multi-channel surround sound
STEP 2
The remote control
∫ Batteries
≥Insert so the poles (i and j) match those in the
remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte
leakage which can damage items the fluid contacts
and may cause a fire.
Remove if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control signal sensor (
➜
page 6), avoiding
obstacles, at a maximum range of 7 m directly in front of the unit.
STEP 3
QUICK SETUP
123 4 5
Power ON.
Shows QUICK
SETUP
screen.
Follow the
message and
make the settings.
Press to finish
QUICK
SETUP.
Press to
exit.
OPTICAL
COAXIAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
CENTER
SUBWOOFER
COAXIAL IN
CENTER SUBWOOFER
SURROUND
(L) (R)
FRONT
(L) (R)
COAXIAL IN OPTICAL IN
AUDIO O UT
5. 1c h
L
R
CENTER
SURROUND
FRONT L/L
SUBWOOFER
FRONT R/R
Coaxial
cable
Audio cable
Connect cables to
terminals corresponding to
the speakers you have
connected.
≥Change “Speaker
Settings” (➜ page
14, “Audio” tab).
WITH AUDIO IN 5.1ch
≥Change “PCM Digital Output”, “Dolby
Digital”, “DTS Digital Surround” and
“MPEG” (➜ page 14, “Audio” tab).
To obtain maximum performance of DVD-Audio multi-channel
linear PCM sound, this connection is recommended. To enjoy
digital multi-channel surround sound, connect to an amplifier
with HDMI terminals (➜ page 4).
Amplifier with a built-in
decoder or a decoder-
amplifier combination
≥You cannot use DTS Digital Surround decoders
not suited to DVD.
≥Even if using this connection, output will be only
2 channels when playing DVD-Audio.
To enjoy multi-channel surround sound, connect
with 5.1 ch AUDIO OUT terminals (
➜
right) or
HDMI terminals (➜ page 4).
Optical digital audio cable
Do not bend sharply when connecting.
WITH COAXIAL IN or OPTICAL IN
Amplifier
Back of the unit
R6/LR6, AA, UM-3
DIRECT NAVIGATOR
TOP MENU
PLAY LIST
MENU
ENTER
DISPLAY
RETURN
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
SUBTITLE
AUDIO
ANGLE/PAGE
SETUP
SETUP
ENTER
RETURN
ENTER
SETUP
STEP 4
Television operation (You can use this unit’s remote control to operate your television.)
Point the remote control at the television
While pressing [Í TV], enter the code with the numbered buttons.
TV
AV
CH
VOLUME
TV operation
Manufacturer and Code No.
\The\United\Kingdom,\Continental\Europe]and]Russia] [Australia\and\N.Z.]
Panasonic 01, 02, 03, 04, 45
AIWA 35
AKAI 27, 30
BLAUPUNKT 09
BRANDT 10, 15
BUSH 05, 06
CURTIS 31
DESMET 05, 31, 33
DUAL 05, 06
ELEMIS 31
FERGUSON 10
GOLDSTAR/LG 31
GOODMANS 05, 06, 31
GRUNDIG 09
HITACHI
22, 23, 31, 40, 41, 42
INNO HIT 34
IRRADIO 30
ITT 25
JVC 17, 39
LOEWE 07
METZ 28, 31
MITSUBISHI 06, 19, 20
MIVAR 24
NEC 36
NOKIA 25, 26, 27
NORDMENDE 10
ORION 37
PHILIPS 05, 06
PHONOLA 31, 33
PIONEER 38
PYE 05, 06
RADIOLA 05, 06
SABA 10
SALORA 26
SAMSUNG 31, 32, 43
SANSUI 05, 31, 33
SANYO 21
SBR 06
SCHNEIDER 05, 06, 29, 30, 31
SELECO 06, 25
SHARP 18
SIEMENS 09
SINUDYNE 05, 06, 33
SONY 08
TELEFUNKEN 10, 11, 12, 13, 14
THOMSON 10, 15, 44
TOSHIBA 16
WHITE WESTINGHOUSE 05, 06
Panasonic/National 01, 02, 03, 04
GOLDSTAR/LG 15, 16
HITACHI 08
JVC 07
MITSUBISHI 09, 10
NEC 13
PHILIPS 12
SAMSUNG 12, 17, 18
SANYO 14, 19
SHARP 11
SONY 05
TOSHIBA 06
Connection to a television/The remote control/QUICK SETUP/Television operation
e.g., 01: [0] ➜ [1]
To Next Page
Loading...
