Panasonic Easa-Phone KX-T2322A - Initial Phone Preparation; Dialing Mode Selector Setup; Ringer Volume Selector Setup; Recall Selector Setup

Preparation
.iZOS ^ ??rry^^ ggr ><
Connect as shown.
■ Do not use any handset other than
Panasonic handset made for the model
KX-T2322A/KX-T2342A.
1 Dialing Mode Selector:
Set to “TONE”.
DIALING MODE
PULSE • • TONE
If dialing can not be done, set to
“PULSE”.
2 Ringer Volume Selector:
Set to “HIGH”.
RINGER
LOW
OFF* • • HIGH
LOW: The ringing sound will be low.
OFF: The telephone will not ring.
( - -"\
Replace all the batteries once a
.year, or misoperation may occur. >
Do not use Nickel-Cadmium or'
Alkaline batteries.
If the batteries are not installed,
programming, and speakerphone or
monitor operation can not be done.
3 Recall Selector:
Set to “E RE” or “T BR”.
T BR E RE
RECALL.
(depending on PBX type)
E RE...for PBX earth recall facility
T BR...for PBX timed break register
recall facility
Enclosures
AAA size batteries.3
Hardware . 1 pack
4 Insert the batteries observing the
correct polarity. (See page 13.)
- 3 -