Need help?Do you have a question about the Panasonic EASA-PHONE KX-T61610 and is the answer not in the manual?
General| Brand | Panasonic |
|---|---|
| Model | EASA-PHONE KX-T61610 |
| Category | Telephone Accessories |
| Language | English |
Guidelines for avoiding malfunction, noise, or discoloration during installation.
Precautions for safe and proper wiring practices to prevent damage or interference.
Connecting the unit frame to earth ground for electrical protection.
Procedure for connecting the system to the central office telephone line.
How to connect proprietary telephones to the system's extension ports.
Guide for connecting standard telephones to the system extensions.
Steps for connecting the DSS console to a system extension.
Guide for connecting the optional unit for power failure protection.
Overview of the programming process and system setup requirements.
A step-by-step walkthrough of a typical programming scenario.
How to set the system's date and time.
How to program and use system speed dialing entries.
How to assign extensions to DSS consoles for direct access.
How to assign CO lines to extensions for outgoing calls.
How to select between tone and pulse dialing modes for CO lines.
How to set the system to automatically switch between day and night service.
How to set the specific start times for day and night service.
How to program which extensions can make outward calls during the day.
How to assign service classes to stations for restricted dialing.
How to set whether to include '1' before dialing long distance calls.
How to enable or disable operator call dialing for extensions.
How to set automatic or manual answering modes for extensions.
How to assign access codes for a host PBX system.
How to set a preferred CO line for incoming calls.
How to enable or disable call waiting tones for extensions.
How to set intercom alerts between voice and tone.
How to set the mode for entering account codes for calls.
How to set when the call duration timer starts counting.
How to configure SMDR parameters for call logging.
How to print system data for backup or analysis.
How to configure SMDR logging for incoming and outgoing calls.
How to set a reminder tone for calls left on hold.
How to set the timing for the hookswitch flash signal.
How to enable or disable CPC signal detection for call termination.
How to set the DSS button mode for call transfer.
How to set the time before a transferred call returns to the original caller.
How to make calls between extensions on the KX-T61610 system.
How to make calls to outside lines.
How to use system speed dialing for quick call access.
How to program and use one-touch dialing features.
Procedures for making calls using a standard telephone.
How to make calls to outside lines.
System's ability to automatically select an idle CO line for outgoing calls.
Manually selecting a CO line for outgoing calls using access codes.
How the system automatically calls back when a line is busy.
How to answer calls ringing on your pickup group.
How to answer calls ringing at other extensions regardless of pickup group.
How to place a call on hold and retrieve it.
How to broadcast a message to all extensions simultaneously.
How to play background music through the telephone speaker.
How to mute your voice during a call.
How to program and access system features with a single button press.
How to access call waiting features for outside calls.
How to enter account codes for calls when required by the system.
How to optionally enter account codes for call records.
How to use the DSS console for intercom calls.
How to program and use feature buttons on the DSS console.
How to prevent other extensions from answering your calls.
How to forward calls to another extension during absence.
Common problems and solutions encountered during initial installation.
Troubleshooting connection issues between components and lines.
Solutions for problems encountered during normal system operation.
How to use the reset button to clear settings and troubleshoot.
Overview of the system's general capabilities and components.
Requirements for informing the telephone company before connecting equipment.
Information on interface parameters and equipment compatibility.
How to connect proprietary and standard telephones in parallel.
Steps for installing the optional door opener adaptor.
How to enable or disable standard telephones connected in parallel.
How to allow an extension to barge into an ongoing outside call.
How to assign CO lines for automatic access or hunting features.
How to change call waiting tones between Tone 1 and Tone 2.
How to program extensions for unlocking doors with door openers.
How to assign carrier codes for accessing common carriers like OCC.
A list of features and programming addresses that have been revised.
How to assign service classes for speed dialing toll restriction.
How to assign service classes to stations for restricted dialing.
How to program denied codes for toll restriction based on phone numbers.
How to program exceptional codes to allow specific restricted calls.
How to set the time for automatic hold recall after a call is placed on hold.
To Next Page