Panasonic EASA-PHONE KX-T61610 - Busy Station Signaling; Last Number Redial

DIALTHE
YOUWILL OIAL "1"
EXTENSION
HEARABUSY
ANDWALTFOR
NUMGER
TONE AN ANSWER
Descriptior2
If rhe estemiot7 you hnvi: dialed is busy. yorr calf
irlfortn that exretrsion [hat morher itrtercottl cali
is waiting by three beeps.
For use of [his feature, the other extension is
requited to be set for this feature beforehand in
the KX-T61610.
Operation
1. Lifr the hcitlclset or pwss the SP-PHO/~E
b11ttot1.
2. Dial the extension nutnber.
3. When you will hear a busy lotze, dial (1)
and wait for m mswer.
Conditions
0 To answer your signal, see “Call Waiting” 011
page 4-l 6.
*If the other party is usitq data equipment, you
may not be able to use this feature.
“If b busy lone is heard ufter dialing 1, it
indicates that &e other party has not beet1 ser
with this feature.
--
--
LIFiTHEHANDSET
ORPRESS
"SP-PHONE"
PRESS
"LNR"
Description
The last photle tlilttiber dialed 011 atz outgoing
call (CO line) cat1 be redialetl.
Opercrtion
\
2. Lift [he hadset or press the SP-PHONE
_,’
burrott.
2. Press the LJJR buttotl.
::
. .
eYou may press the CO brltrotz to select the CO
line directly lifter lifting the hatdset or press.
the SP-PHONE or MONITOR button.
Conditions
*Up to 32 digits ccttl be siorcd utzcl redialed.
Plid7itig rlie “W’ “#” Or “PA USE” blllfotl
C011tlt.s 0s I digit.
5
iz+ Whet2 cullitlg or while itz the cotlversalion
ttlotle, pressitlg [he LNR buttotz will cause the
medial to operfice after about 3 secotids.
- L
4-8