Panasonic EASA-PHONE KX-T61610 - To Connect a Polarity Sensitive Telephone

1. Cotmeci all extension wiritlg lo the KX-T61610.
2. Cotlfirtn that dialitlg can be done from all the
estetlsiotls using a tone relephotle.
If the telephone you are using with the KX-T61610 is polarity sensitive.
6. Confirm that dialing can be done on following
exrensiotis iisirig a rotze telephone.
Exlension Il.. . CO I
Extetisioti 12...CO 2
Extension 13... CO 3
Extension 14...CO 4
Esterisioti 15...CO 5
Extensiotz 16.. . CO 6
3. If a dialing cat1 tlof be dotle, rhe polarify berlcseen
the exretlsiotl atld rhe h’X-T61610 musI be re-
\,ersed.
Cenirul Office Line
E.uerlsion
4. Ser rhe Power Switch ot1 the KX-T61610 to the
OFF positiotz.
7. If dialing cat1 not be done, the polarity between
rhe KX-T61610 atld the Cerltral Ofice Lirle tnust
be reversed.
Extension
Re\.erse here
8. If any extetlsiort is changed or replaced, repeal
these procedures (from step 1 through step 7).
5. Connect all Central O.ffice (CO) Lines.
- .
2-14