EN25
Select again in steps
2
–
4
.
●
Press within approximately 40 seconds of reselecting an action in step
2
, otherwise the reselection will be canceled
automatically.
Press the MEMORY button for 2 seconds during the action.
●
You can save your favorite manual action, stretch action and air massage to create your own course. (Pages EN31 – EN33)
4
Press to start the action.
●
The massage heads will move to selected position to start the massage
after the body scanning is completed.
(See page EN22 about body
scanning)
●
See pages EN34 – EN37 for setting the massage in accordance with
your preferences.
●
When massaging the hip, air massage will not be carried out at the
same time.
●
When a massage to the same location has continued for 5 minutes,
massage heads will automatically move up approximately 3 cm.
(Depending on the location, the massage may move up.)
Press to add tapping.
The tapping can be turned OFF/ON by pressing this button.
OFF/ON cannot be selected when massaging with the tapping
action.
5
The massage will automatically end
approx. after 16 minutes.
To change an action in the middle of a massage
To save manual action in the memory course
If you want to massage with tapping action only
❶
Press to turn on the power.
❷
Press .
❸
Start the tapping action by pressing .
ㅡ
Tapping action will be performed at the current massage head positions without performing body scanning.
ㅡ
To change the action, select with steps
2
–
4
.
When you want a concentrated massage of a particular
body part with your favorite action
To Next Page
Loading...
