EN29
▶
Continued on the next page
Memory Course
Saving a Auto Course with My Own Favorite Settings
Up to 3 memory courses can be saved.
Refer to “Saving a Auto Course with My Own Favorite Settings” (Page EN29) and “Creating Your Own Course” (Page
EN31) to see how to save a memory course.
To save during a auto course
Press the
个人化记忆
buttons for 2 seconds during an operation to
save a favorite setting.
The saved
个人化记忆
button will light up then.
To save at the end of a auto course
①
At the end of the auto course, the
个人化记忆
button
flashes.
●
Saving is also possible when you press to end the
massage mid-way through a course.
●
Saving is also possible during a stowing action.
②
Select and press the button of the course in which you want to
save your favorite setting for 2 seconds while the buttons are
flashing
(flashing lasts for about 25 seconds)
.
●
Selected button will light. (Example: )
●
If another setting has already been saved, the message “Another
course has been saved” appears and the button starts to flash
rapidly.
ㅡ
To update the contents of a new setting, press the same
button again.
Press
ㅡ
If you do not want to delete the setting already saved, press
other
个人化记忆
button.
Press
③
At the end of the stowage operation, the power will be turned
of f approx. after 5 seconds.
Caution
The setting will not be saved if you turn OFF
the power switch of the main unit or pull out
the power cord during a massage.
Memory settings that can be saved (Pages EN34 – EN37)
Air · Stretching and Sole massage
Memory Course
To Next Page
Loading...
