EN40
Display Volume
“Of f” “Soft” “Medium” “Loud”
(Default setting)
This is a function which briefly explains the operation procedures and contents of the action.
■
Adjusting the volume
Press to adjust (volume raises/lowers with each press).
●
Use to register the current volume to the memory course. (Page EN29)
Voice guidance function
Press the OK button if the position
is OK.
Adjust the position of the pillow.
The operation sound (beep) and the limit
sound (beep-beep-beep) will be turned of f.
Adjusting the intensity
(Continued)
Press to adjust.
For adjusting the reclining angle and legrest
●
When holding down the adjustment buttons, chair adjustment will continue
until you hear the limit sound (beep-beep-beep).
●
There may be a slight delay before the legrest starts moving.
●
Armrests will move in conjunction with the reclining of the backrest.
To Next Page
Loading...
