Panasonic ES-LL21 - Drying and Lubricating Parts; Replacing Parts; Replacing Outer Foil and Inner Blades

16
English
5. Dry the outer foil section, the
shaver, the trimmer, and the
comb attachment completely.
• Allow the shaver to dry in the
shade, avoid direct sunlight.
ES-LL41
1~3 mm
ES-LL41
5~7 mm
6. Lubricate the shaver.
It will keep the movement of the
blade smooth and maintain a
comfort shave.
1. Apply one drop of oil to each of
the system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately ve
seconds.
4. Switch off the shaver, and wipe off any excess oil from
the system outer foil with a soft cloth.
Notes
• Be careful not to hit the main body on the sink or any other
object while draining the water.
Failure to do so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, cracking or discoloration
of the parts.
Wipe with diluted soapy water.
• Do not use any kitchen or bathroom detergents other than
hand soap.
Doing so may cause malfunction.
Replacing the system outer foil and
the inner blades
System outer foil Once every year
Inner blades Once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil,
preventing complete attachment to the foil
frame.
2. Align the foil frame mark ( ) and the
system outer foil mark ( ) and securely
attach together until it clicks.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
PB016461 - ES-LL2141-K551 ������_(01EN)_08-01-18.indd 16 2018/8/1 17:25:29