19
Problem Action
Shavings y out in all
directions.
This can be improved by cleaning
every time after shaving.
System outer foil gets
hot.
Apply oil.
Check if the system outer foil is
damaged or deformed.
If yes, replace it.
(See page 16.)
You do not get as
close a shave as
before.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
Problem Action
Shaver does not
operate even after
charging.
Use the appliance in an ambient
temperature approximately 5 °C
(41 °F) or higher.
The battery has reached the end of
its life.
The shaver will not operate with the
AC adaptor connected.
Please use the shaver after it has
been sufciently charged and the
AC adaptor disconnected.
The driving sound
changes while
shaving.
The shaving sensor is operating.
The sound changes depending on
the beard thickness.
Makes a loud sound.
Apply oil.
The blades will not move smoothly
when there is no oil on the blades,
requiring more power.
The shaver makes a high-pitched
sound due to the linear motor drive.
This does not indicate a problem.
Conrm that the blades are
properly attached.
The odor is getting
stronger.
This can be improved by cleaning
every time after shaving.
PB016461 - ES-LL2141-K551 ������_(01EN)_08-01-18.indd 19 2018/8/1 17:25:30
To Next Page
Loading...
