5-168
FP1/FP-M/FP2/FP2SH/FP10SH/FP3
Address Name Description
R902D
Sampling trace end
flag
(Available PLC: FP2/
FP2SH/FP3/FP10SH)
Turns on when the sampling trace ends.
R902E
Sampling trigger flag
(Available PLC: FP2/
FP2SH/FP3/FP10SH)
Turns on when the sampling trace trigger of the F156
(STRG)/P156 (PSTGR) instruction is turned on.
R902F
Sampling enable flag
(Available PLC: FP2/
FP2SH/FP3/FP10SH)
Turns on when the starting point of sampling is specified.
R9030
F145 (SEND)/P145
(PSEND) and F146
(RECV)/P146 (PRECV)
instruction executing
flag
Monitors if CPU is in the F145 (SEND)/P145 (PSEND) and
F146 (RECV)/P146 (PRECV) instructions executable
condition as follows:
- off: None of the above mentioned instructions can be
executed.
- on: One of the above mentioned instructions can be
executed.
R9031
F145 (SEND)/P145
(PSEND) and F146
(RECV)/P146 (PRECV)
instruction end flag
(Available PLC: FP2/
FP2SH/FP3/FP10SH)
Monitors if an abnormality has been detected during the
execution of the F145 (SEND)/P145 (PSEND) and F146
(RECV)/P146 (PRECV) instructions as follows:
- off: No abnormality detected.
- on: An abnormality detected. (communication error)
The error code is stored in:
- FP3: DT9039
- FP2/FP10SH: DT90039
R9032
COM port mode flag
(Available PLC:
FP-M C20C, C32C/FP1
C24C, C40C, C56C,
C72C/FP2/FP2SH/
FP10SH)
Monitors the mode of the COM port as:
- on: Serial data communication mode
- off: Computer link mode
R9033
F147 (PR) instruction
flag
(Available PLC:
FP-M C20, C32/FP1
C24, C40, C56,C72/
FP2/FP2SH/FP3/
FP10SH)
Turns on while a F147 (PR) instruction is executed.
Turns off when a F147 (PR) instruction is not executed.
R9034
Editing in RUN mode
flag
(Available PLC: FP2/
FP2SH/FP3/FP10SH)
Turns on while editing a program in the RUN mode.
R9035
F152 (RMRD)/P152
(PRMRD) and F153
(RMWT)/P153
(PRMWT) instruction
execution flag
(Available PLC: FP2/
FP2SH/FP3/FP10SH)
Monitors if FP3/FP10SH is in the F152 (RMRD)/P152
(PRMRD) and F153 (RMWT)/P153 (PRMWT) instructions
executable condition as follows:
- off: None of the above mentioned instructions can be
executed.
- on: One of the above mentioned instructions can be
executed.