High−level Instructions
3 − 28
Description
The two 32-bit data or two 32-bit equivalent constant specified by S1 and S2 is copied to the 64-bit area (D+3,
D+2, D+1 and D) specified by D when the trigger turns on.
Related instruction
To copy three 32-bit data, use the F191 (DMV3) instruction.
Flag conditions
・Error flag (R9007): Turns on and stays on when the area specified using the index modifier
exceeds the limit.
・Error flag (R9008): Turns on for an instant when the area specified using the index modifier
exceeds the limit.
To Next Page