High−level Instructions
3 − 152
Description
The two groups of word data specified by S1 and S2 are combined by bit unit processing using the mask data
specified by S3 and stored in the area specified by D.
(S1 S3) (S2 S3) → (D)
When S3 is H0, the contents of S2 stored in the D.
When S3 is HFFFF, the contents of S1 stored in the D.
Flag conditions
・Error flag (R9007): Turns on and stays on when the area specified using the index modifier
exceeds the limit.
・Error flag (R9008): Turns on for an instant when the area specified using the index modifier
exceeds the limit.
・= flag (R900B): Turns on for an instant when the calculated result is recognized as “0”.
To Next Page