High−level Instructions
3 − 295
Description
Inverts [off (0) → on (1) or on (1) → off (1)] the state at bit position specified by “n” in the 16-bit area specified
by D.
Bits other than the specified bit are not inverted.
The “n” is decimal data specifying the bit position to be inverted. Range of “n”: K0 to K15
n
····
Bit position
·····
15 12 11 8 7 4 3 0
The data in bit
positions 4 through 15
are invalid.
Range of “n”: K0 to K15 (H0 to HF)
———— ———— ————
0000
Flag conditions
・Error flag (R9007): Turns on and stays on when the area specified using the index modifier
exceeds the limit.
・Error flag (R9008): Turns on for an instant when the area specified using the index modifier
exceeds the limit.
To Next Page