EasyManua.ls Logo

Panasonic FV-30BW2H - Routine Maintenance Procedures

Panasonic FV-30BW2H
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
使
3. Please stop operating the product during typhoon or similar weather with strong
wind and rain.
2.The applicable ambient temperature of this product is in the range of -10 °C 40 °C,
~
using it out of this range may cause a fault.
-10 °C 40 °C
~
使
USE AND MAINTENANCE INSTRUCTIONS
:
(當2200時(約3月))
Cleaning the filter:
1. Do not wash the filter with water, because water may destroy the anti-microbial
performance of the filter; do not use a wire brush or any other hard tool to clean
the filter, lest the filter would be damaged.
2. When the filter cleaning indicator at the receiving part of the main body blinks, it
is time to clean the filter according to setting of the main body. You need to clean
the filter. (When the accumulated running duration reaches 2,200 hours
(continuous running about three months), the filter cleaning indicator will blink.)
3.To prevent dust accumulation in the filter which may block the air inlet,be
sure to clean the filter before starting the product when product has not been
in use for a period of time even if the filter cleaning indicator does not blink.
Also,when the product is not often used,clean the filter regularly even if the
filter cleaning indicator does not blink.
:
使使
使
Cleaning the louver:
1. To prevent color change and accelerated aging of the panel, do not use any type
of diluent, alkaline cleaner, benzene, alcohol, antiseptic, or steel ball as shown
below.
2. To use a chemical cloth, clean this product by
following the instructions.
Cleaning Precautions
MAINTENANCE
28
使使
使使
4.The bathroom size may affect the heating performance of this product.

Related product manuals