Panasonic FW300 - Hardware and Operational Status Queries

38/49
2.115. Query STARTUP LOGO
Hexadecimal 02h 51h 4Ch 4Fh
03h
Character Q L O
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
AV MUTE
REMOTE
○ ○ ○ ○ ○
Parameters (*1, *2)
OFF ON USER
Hexadecimal 30h 31h 32h
Character 0 1 2
2.116. Query COMPUTER2 SELECT
Hexadecimal 02h 51h 52h 49h 03h
Character Q R I
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
AV MUTE
REMOTE
○ × ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
INPUT OUTPUT
Hexadecimal 32h 49h 4Eh 32h
4Fh
55h
Character 2 I N 2 O U
2.117. Query NO SIGNAL SHUT-OFF
Hexadecimal 02h 51h 41h 46h
03h
Character Q A F
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 03h
Character *2 *4
Acceptability
SECURITY STANDBY NO SIGNAL
AV MUTE
REMOTE
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4)
• The timer can be set to "DISABLE", or 15 to 60 minutes every 5 minutes.
• Examples of "DISABLE", "15 min." and "60 min." are below.
DISABLE 15 60
Hexadecimal 30h 30h 31h 35h 36h 30h
Character 0 0 1 5 6 0
2.118. Query INITIAL START UP
Hexadecimal 02h 51h 50h 59h
03h
Character Q P Y
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
AV MUTE
REMOTE
○ ○ ○ ○ ○
Parameters (*1, *2)
STANDB
Y
ON LAST MEMOR
Y
Hexadecimal 30h 31h 32h
Character 0 1 2