Need help?Do you have a question about the Panasonic FW300 and is the answer not in the manual?
Explains the fundamental structure of commands sent via serial terminal, including STX, Command, Parameters, and ETX.
Details the projector's response format for accepted, non-existent, or parameter error commands.
Commands for turning the projector on/off and performing automatic setup.
Commands for controlling AV mute, volume, freeze, and digital zoom functions.
Commands for selecting input sources, navigating menus, and controlling basic cursor movement.
Commands for adjusting picture mode, contrast, brightness, color, tint, and sharpness.
Commands for managing TV system, language, wireless LAN, and other system configurations.
Commands to query the projector's power, lamp, and current input status.
Commands to query settings like AV mute, freeze, picture mode, and color adjustments.
Commands to query system information such as TV system, noise reduction, white balance, and aspect ratio.
Commands to query status related to hardware, operational modes, and specific functions like serial number.
To Next Page
General