Panasonic PT-FZ570

Questions and Answers:

T
thomastoniAug 19, 2025
How to fix a Panasonic PT-FZ570 Projector that does not turn on?
- G
  gillespieteresaAug 19, 2025
  If your Panasonic Projector isn't powering on, try these steps: * Ensure the power plug is firmly inserted into the outlet. * Check if the switch is set to ; if so, turn it on. * Verify the wall outlet is supplying electricity. * Check your circuit breakers to see if they have tripped. * Examine the lamp indicator and the temperature indicator to see if they are lit or blinking. * Make sure the lamp cover is securely attached.
J
jeffery64Aug 21, 2025
Why is my Panasonic PT-FZ570 Projector remote control not working?
- L
  Lori PerkinsAug 21, 2025
  If the remote control for your Panasonic Projector isn't responding, consider the following: 1. Check if the batteries are depleted and replace them if necessary. 2. Ensure the batteries are inserted with the correct polarity. 3. Make sure there are no obstructions between the remote control and the projector's signal receiver. 4. Verify the remote control is being used within its effective operation range. 5. Check if other light sources, like fluorescent lights, are interfering with the projection. 6. Confirm that the [REMOTE CONTROLLER] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE]. 7. Ensure the ID number setting operation is correct.
C
Cameron DiazAug 25, 2025
What to do if my Panasonic Projector shows no image?
- J
  jennifer76Aug 25, 2025
  If no image appears on your Panasonic Projector, check the following: * Ensure connections to external devices are correctly performed. * Verify the input selection setting is correct. * Check that the [BRIGHTNESS] adjustment is not set to the minimum. * Confirm the external device connected to the projector is working properly. * Ensure the AV mute function is not in use. * Verify the lens cover is removed from the lens.
S
Stephen DiazAug 26, 2025
Why is the HDMI video on my Panasonic Projector not displaying correctly?
- V
  Vanessa HintonAug 27, 2025
  If the video from an HDMI compatible device does not appear or is jumbled on your Panasonic Projector, try these solutions: * Ensure the HDMI cable is securely connected. * Try turning off and then on the power of both the projector and the external device. * Verify that the input signal is compatible with the projector.
D
Darren RichardsonAug 28, 2025
Why is my Panasonic Projector not displaying the image from my computer?
- M
  Michael PatelAug 28, 2025
  If the image from a computer does not appear on your Panasonic Projector, consider these points: * Check if the cable is too long. For D-Sub cables, the length should be 10 m (32'10") or shorter. * Verify that the external video output on the laptop computer is set correctly. (For example, the external output settings may be switched by pressing the “Fn” + “F3” or “Fn” + “F10” simultaneously. Refer to your computer's user manual as the method varies.)
T
Tiffany BrownAug 30, 2025
Why is my Panasonic Projector image not displaying correctly?
- V
  Vincent BrownAug 30, 2025
  If the image on your Panasonic Projector is not displaying correctly, check these settings: * Ensure the [TV-SYSTEM], [RGB/YC C ]/[RGB/YP P ] selection is set correctly. * Verify there is no problem with the video tape or other image sources. * Make sure the input signal is compatible with the projector.
T
Terry AndersonSep 1, 2025
How to resolve a fuzzy image on my Panasonic PT-FZ570 Projector?
- M
  Matthew MendozaSep 1, 2025
  If the image on your Panasonic Projector is fuzzy, try the following: * Ensure the lens focus is set correctly. * Verify the projection distance is appropriate. * Check if the lens is dirty and clean it if necessary. * Make sure the projector is installed perpendicular to the screen.
M
Monica RussellSep 3, 2025
Why is there no audio output from my Panasonic PT-FZ570?
- L
  lbellSep 3, 2025
  If there is no audio output from your Panasonic Projector, please check the following: * Ensure the external device is correctly connected to the audio input terminal. * Verify that [MUTE] in [AUDIO SETTING] is not set to [ON]. * Confirm the audio input selection in [AUDIO SETTING] is set correctly.
K
kellyhaleSep 5, 2025
Why does the color appear pale on my Panasonic PT-FZ570?
- M
  Mark HallSep 5, 2025
  If the color on your Panasonic Projector appears pale or grayish, check the following: * Ensure that [COLOR] or [TINT] is adjusted correctly. * Verify the external device connected to the projector is adjusted correctly. * Inspect the RGB cable for any damage.
M
Monique HughesSep 7, 2025
Why is there no sound from the built-in speaker on my Panasonic Projector?
- D
  danielcharlesSep 8, 2025
  If audio is not output from the built-in speaker of your Panasonic Projector, check these settings: * Verify that [BUILT-IN SP] in [AUDIO SETTING] is not set to [OFF]. * Ensure the audio input selection in [AUDIO SETTING] is set correctly.

Panasonic PT-FZ570 Specifications

General

Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	484 W
Focus	Manual
Zoom capability	Yes
Focal length range	17.1 - 31.7 mm
Aperture range (F-F)	1.6 - 2.2
Lamp power	270 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	6000 h
Service life of light source (economic mode)	8000 h
Native aspect ratio	16:10
Projection distance	- m
Vertical scan range	24 - 120 Hz
Horizontal scan range	15 - 91 kHz
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	40 - 400 \
Projector native resolution	WUXGA (1920x1200)
Keystone correction, vertical	-25 - 25 °
Keystone correction, horizontal	-30 - 30 °
Noise level	35 dB
Noise level (economic mode)	29 dB
Dot clock scanning frequency	162 MHz
RMS rated power	10 W
Number of built-in speakers	1
12V trigger	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Wi-Fi	-
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Cable lock slot type	Kensington