Panasonic GT series - 3 Settings of GT Series (GTWIN); Creating New GT Series Screen Data

10
3. Settings of GT Series (GTWIN)
3.1 Creating New GT Series Screen Data
For creating screen data to connect with FP7, "Panasonic FP7 series" should be selected for PLC Model.
Select "Panasonic FP7 series" for PLC Model on the GTWIN screen for creating a new file.
When selecting a GT model that is not supported for FP7, "Panasonic FP7 series" cannot be selected for
PLC Model. Use a GT model supported for FP7.