What to do if Panasonic GT32 screen is blank?
If your Panasonic Monitor screen is blank, there are a couple of potential causes. First, ensure that the power supply is connected to the unit according to the specifications. Second, if only lamp and message parts are configured to the base screen, verify that the address of the substitute reference device and the device values on the PLC side are correct.
What to do if Panasonic GT32 displays [Screen No. Error]?
If your Panasonic Monitor displays '[Screen No. Error]', it could be due to several reasons. * The screen settings from the PLC, the GT’s switch part or the auto-paging indicate an unregistered screen number. If this is the case, create and register screen content or specify the correct screen number. * When bringing up the keyboard screen during data input, an unregistered keyboard screen number was specified. In this case, create and register keyboard screen or specify the correct keyboard number. * GT configuration data and keyboard screen data exist in the GT, but there is no base screen data. To solve this, transfer base screen data from GTWIN.
What to do if Panasonic Monitor displays [Memory is Full]?
If your Panasonic Monitor displays '[Memory is Full]', it means that the total capacity of transferred base screen data exceeds the 384 Kbyte capacity of the GT. To resolve this, delete part of the base screen data so that the capacity doesn’t exceed the total capacity. You can check data capacity by going to [View (V)]?[Memory Usage Conditions] on GTWIN menu bar. If the data capacity is not over the limit, invalid data could possibly be remaining in the GT; when transferring data, do so after deleting the screen.
Why does an unspecified screen appear or there is trouble when switching screens on Panasonic GT32?
If an unspecified screen appears or you experience trouble when switching screens on your Panasonic Monitor, there are several potential reasons: 1. The screen specification in the PLC screen setting, the GT switch part or the auto-paging is wrong. To fix this, specify the correct screen number. 2. The startup screen is specified in the GT configuration settings (GTWIN). Check the start-up screen setting for the GT configuration settings in GTWIN. Delete unnecessary settings and re-transfer configuration data. 3. An erroneous device or value is specified in the first word of the basic communication area word device. Check the device content specified on the PLC side in the first word of the basic communication area. (Do not use the basic communication area with ladder programs.)
What does it mean if my Panasonic Monitor screen displays [No Screen data]?
If your Panasonic Monitor screen displays '[No Screen data]', it indicates that there is no base screen data in the GT. This appears even when GT configuration data exists. To resolve this, transfer base screen data.
Critical situations that could lead to user's death or serious injury.
Critical situations that could lead to user's injury or property damage.
Highlights key features like compact installation, color options, touch panel, and connectivity.
Details password and operation security functions for user access control.
Specifies environmental conditions for installing GT series units.
Guidelines for proper grounding to minimize noise interference.
Wiring for RS232C connection to PLC Tool Port.
Wiring for RS232C connection to FP-X COM ports.
Wiring for RS232C connection to FPΣ COM ports.
Wiring for RS232C connection to FP0/FP0R COM ports.
Wiring for RS232C connection to FP-e COM ports.
Wiring for RS232C connection to FP2/FP2SH COM ports.
Wiring for RS422 connection to FP-X COM ports.
Wiring for RS422 connection to FP2/FP2SH COM ports.
Wiring for RS422 connection using a C-NET adapter.
Wiring for RS485 connection to FP0R COM ports.
Wiring for RS485 connection to FP-X COM ports.
Wiring for RS485 connection to FPΣ COM ports.
Wiring for RS485 connection to FP-e COM ports.
Wiring for RS485 connection with FP2/FP2SH units.
Enables automatic adjustment of communication settings.
Enables simultaneous PLC debugging and data transfer.
Guide to installing the USB driver for FPWIN GR.
Instructions for setting PLC communication parameters in FPWIN GR.
Instructions for setting PLC communication parameters in FPWIN GR7.
Explains error code display and types (GT series vs. PLC).
Lists and explains error codes specific to GT units.
Details general specifications for the GT01 model.
Details performance specifications for the GT01 model.
Details function specifications for the GT01 model.
Details interface specifications for the GT01 model.
Details general specifications for the GT02 model.
Details performance specifications for the GT02 model.
Details function specifications for the GT02L model.
Details interface specifications for the GT02 model.
Details general specifications for the GT02L model.
Details performance specifications for the GT02L model.
Details interface specifications for the GT02L model.
Details general specifications for the GT03-E model.
Details performance specifications for the GT03-E model.
Details function specifications for the GT03-E model.
Details interface specifications for the GT03-E model.
Details general specifications for the GT05 model.
Details performance specifications for the GT05 model.
Details function specifications for the GT05 model.
Details interface specifications for the GT05 model.
Details general specifications for the GT11 model.
Details performance specifications for the GT11 model.
Details function specifications for the GT11 model.
Details interface specifications for the GT11 model.
Details general specifications for the GT12 model.
Details performance specifications for the GT12 model.
Details function specifications for the GT12 model.
Details interface specifications for the GT12 model.
Details general specifications for the GT21 model.
Details performance specifications for the GT21 model.
Details function specifications for the GT21 model.
Details interface specifications for the GT21 model.
Details general specifications for the GT32 model.
Details performance specifications for the GT32 model.
Details function specifications for the GT32 model.
Details interface specifications for the GT32 model.
Details general specifications for the GT32-R model.
General| Screen Size | 32 inches |
|---|---|
| Aspect Ratio | 16:9 |
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Display Technology | LCD |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle | 178°/178° |
| Input Ports | HDMI, VGA |
To Next Page
