Panasonic GT32

3-5
3.1.4 UL/c-UL Qualification
Be aware of the following when applying for UL standard for the equipment that the GT has been
built in.
 When the GT built in equipment, the GT should meet the standard as a part of the enclosure.
 As the rear of the GT is not qualified as an enclosure, provide a fire enclosure (metal barrier) that
entirely covers the rear and lateral sides of the GT.
3.1.5 Mounting Screws
Secure the GT to a mounting plate using the fitting and screws provided with the unit.
Recommended screws
Recommended product
GT unit
Size
Others
Quantity
Mounting screw
GT01/GT11
M3 – 20
Material: SW pane-head (+)
Galvanization,
trivalent chromate
4 pcs/unit
GT05/GT21/GT32/
GT32-R/GT32-E
M3 – 25
GT02/GT02L/GT03-E/GT12 dedicated screw
The GT02/GT02L/GT03-E/GT12 dedicated screw is not sold on the open market.
Using screws other than the dedicated screw will cause failures such as decrease of water-proof
property.
Name
Content
Model No.
Attachment fitting
(with dedicated screws)
5 sets for GT02/GT02L/GT03-E/GT12
4 pcs of attachment fittings and 4 pcs of dedicated
screws/set
AIG12830