Why is remaining battery indication not displayed properly on my Panasonic HC-V100M Camcorder?
The remaining battery capacity indication on your Panasonic Camcorder is an approximation. If it's not displaying correctly, fully charge the battery, discharge it completely, and then charge it again.
What to do if my Panasonic HC-V100M cannot be operated even though it is turned on?
If your Panasonic Camcorder is on but not responding, try the following: 1. Remove the battery or AC adapter. 2. Wait for about 1 minute. 3. Reconnect the battery or AC adapter. 4. Wait another minute, then turn the unit on again.
How to fix Panasonic Camcorder when it arbitrarily stops recording?
If your Panasonic Camcorder stops recording unexpectedly, consider the following: * Ensure you are using an SD card suitable for motion picture recording. * Format the SD card or built-in memory using the camcorder to address potential data writing speed issues. * If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
Why is my Panasonic Camcorder turning off automatically?
Your Panasonic Camcorder might be turning off automatically because of the VIERA Link function. If the unit turns off when you turn off the power to the TV using the TV remote control, the VIERA Link is at work. To prevent this, set [VIERA Link] to [OFF] if you are not using it.
What to do if the SD card is not recognised by my Panasonic Camcorder?
If your Panasonic Camcorder doesn't recognize the SD card, it might be because the card was formatted on a PC. Use the camcorder itself to format SD cards for optimal compatibility.
Video or audio is not output even though Panasonic Camcorder is connected to TV correctly. What to do?
If video or audio is not output even though your Panasonic Camcorder is connected to the TV correctly: * Select the correct channel on your TV that matches the input used for the connection. * Adjust the [TV ASPECT] setting to match the TV's aspect ratio. * Adjust the unit's settings based on the cable connection to the TV. * Note that no audio will play on the TV during recording mode. * Adjust the volume on your television, as the unit's volume cannot be adjusted during playback to a TV.
What to do if SD card inserted in another device is not recognised?
If the SD card is not recognized when inserted into another device, verify that the device is compatible with the SD card's capacity or type (SD Memory Card/SDHC Memory Card/ SDXC Memory Card).
How to fix VIERA Link not working on Panasonic HC-V100M Camcorder?
If VIERA Link is not working on your Panasonic Camcorder, ensure that you: 1. Connect with a HDMI mini cable (optional). 2. Set [VIERA Link] to [ON]. 3. Turn the unit off and then back on again.
Why does colour or brightness change or horizontal bars appear on my Panasonic Camcorder's LCD monitor?
The color or brightness changes, or horizontal bars that you may see in the image on your Panasonic Camcorder, when recording under fluorescent, mercury, or sodium light are not a malfunction. To minimize this, record in Intelligent Auto Mode, or set the shutter speed to 1/100 in 50 Hz areas or 1/125 in 60 Hz areas.
How to fix auto focus on Panasonic HC-V100M Camcorder?
If the Auto Focus function on your Panasonic Camcorder isn't working, try switching to Intelligent Auto Mode. Alternatively, if you're recording a difficult-to-focus scene in Auto Focus Mode, switch to Manual Focus Mode and adjust the focus manually.
To Next Page
General