To Next PageTo Next PageHow to fix the auto focus on my Panasonic HC-V180 Camcorder?
Switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you are trying to record a scene which is hard to bring into focus in Auto Focus Mode, use the Manual Focus Mode to adjust the focus.
Why is there no image or sound when Panasonic HC-V180 is connected to TV?
If you've connected your Panasonic Camcorder to a TV but aren't getting any images or sound, or the images appear squeezed, first, check your TV's operating instructions and select the channel that corresponds to the input you're using for the connection. Also, adjust the [TV ASPECT] setting on your camcorder to match the aspect ratio of your TV. Note that during playback mode, audio is output from the TV, not the camcorder, and sound levels should be adjusted on the TV itself.
What to do if Panasonic Camcorder is not detected by PC via USB?
If your Panasonic Camcorder isn't being detected by your PC when connected via USB, re-insert the SD card into the camcorder and reconnect the supplied USB cable. Try a different USB terminal on your PC. Verify the operating environment. After restarting the PC and turning on the camcorder again, reconnect the USB cable.
What to do if my Panasonic Camcorder displays 'ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.'?
This message indicates that the unit has automatically detected an error. Try restarting your Panasonic Camcorder by turning it off and then on again. If the error message continues to appear after restarting, the unit may need repair. In this case, detach the power and consult the dealer from whom you purchased the unit. Do not attempt to repair the camcorder yourself.
Why is my Panasonic Camcorder not detected by my PC?
Try these steps: 1. Re-insert the SD card into the unit, then reconnect the supplied USB cable. 2. Select another USB terminal on the PC. 3. Check the operating environment. 4. Restart the PC and turn on the unit again before reconnecting the USB cable.
Why does my Panasonic HC-V180 Camcorder image flicker or show bars indoors?
Changes in color or brightness, horizontal bars, or flickering on the LCD monitor of your Panasonic Camcorder when recording under fluorescent, mercury, or sodium light are not malfunctions. In Motion Picture Recording Mode, record in Intelligent Auto Mode/Intelligent Auto Plus Mode or set the shutter speed to 1/100 in areas where the power supply frequency is 50 Hz, or 1/125 in areas of 60 Hz.
Why can't I copy files from Panasonic HC-V180 Camcorder SD card via USB?
If you cannot copy scenes from the SD card of your Panasonic Camcorder when connecting to other equipment with the USB cable, the other equipment might not have recognized the SD card. Try unplugging the USB cable and reconnecting it.
Why is Panasonic Camcorder not detected by other devices via USB?
If your Panasonic Camcorder is not detected by other devices when connected via USB cable and using only the battery, reconnect using the AC adapter.
Why does my Panasonic HC-V180 stop recording by itself?
If your Panasonic Camcorder stops recording unexpectedly, ensure you are using an SD card suitable for motion picture recording. The recordable time may be reduced due to the data writing speed or repeated recording and deletion. Try formatting the SD card using the camcorder. Also, if [AGS] is set to [ON], record in the normal horizontal position or set [AGS] to [OFF].
What to do if Panasonic Camcorder displays 'Error occurred' message?
If your Panasonic Camcorder displays the message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN,” it means the unit has detected an error. Try restarting the unit by turning it off and then on again. If the error persists after restarting, it indicates a need for repair. Disconnect the power and consult the dealer from whom you purchased the unit. Do not attempt to repair the unit yourself.
General| Sensor type | MOS BSI |
|---|---|
| Total megapixels | 2.51 MP |
| Optical sensor size | 1/5.8 \ |
| Effective megapixels (image) | 2.2 MP |
| Digital zoom | 500 x |
| Optical zoom | 50 x |
| Image stabilizer | Yes |
| Focal length range | 2.06 - 103 mm |
| Image stabilizer type | Hybrid Image Stabilization (HIS) |
| Maximum aperture number | 4.2 |
| Minimum aperture number | 1.8 |
| Focal length (35mm film equivalent) | 28 - 1740 mm |
| 3D | - |
| Camcorder type | Handheld camcorder |
| Minimum illumination | 1 lx |
| Supported aspect ratios | 3:2, 4:3, 16:9 |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), ENG, HIN, PER, THA |
| Focus adjustment | Auto/Manual |
| Shutter speed (photo) | 1/2 - 1/2000 s |
| Camcorder media type | Memory card |
| Disc types supported | No |
| Compatible memory cards | SD, SDHC, SDXC |
| Internal storage capacity | - GB |
| Video resolutions | 960 x 540, 1280 x 720, 1920 x 1080 pixels |
| Supported video modes | 720p, 1080i, 1080p |
| Video formats supported | AVCHD, H.264, MP4, MPEG4 |
| Maximum video resolution | 1920 x 1080 pixels |
| Charging source | AC, Battery |
| Battery capacity | 1940 mAh |
| Battery life (max) | - h |
| Video recording time | 1.25 h |
| Audio system | Dolby Digital 2.0 |
| Image formats supported | JPEG |
| Maximum image resolution | 4224 x 2376 pixels |
| Still image resolution(s) | 4224 x 2376, 1920 x 1080, 3408 x 2272, 1728 x 1152, 3136 x 2352, 640 x 480 |
| Display diagonal | 2.7 \ |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Mini HDMI ports quantity | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Cables included | Mini-HDMI, USB |
| Product color | Black |
Weight and Dimensions| Depth | 116 mm |
|---|---|
| Width | 53 mm |
| Height | 59 mm |
| Weight | 211 g |
