To Next PageTo Next PageWhy [Home Cam] cannot be used on my Panasonic HC-V550 Camcorder?
Ensure that the wireless access point is connected to the Internet and that the wireless access point and the camcorder are properly connected.
What to do if my Panasonic Camcorder cannot be operated even though it is turned on?
Remove the battery or AC adapter, wait for about a minute, and then reconnect it. Wait another minute, and then turn the unit on again. Note that doing this while the media is being accessed may damage the data on the media. If normal operation is not restored, detach the power connected, and consult the dealer who you purchased this unit from.
What to do if the Panasonic Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
The unit has detected an error. Turn the unit off and then on again to restart it. The unit will turn off automatically in about 1 minute if you don't turn it off and on. If the error message appears repeatedly after restarting, detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
How to fix Panasonic Camcorder when it stops recording arbitrarily?
Make sure you are using an SD card that is suitable for motion picture recording. The recordable time may be shortened due to the deterioration of the data writing speed or repeated recording and deletion. Format the SD card using the camcorder. If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
I have forgotten the password for the Wi-Fi on my Panasonic Camcorder, what to do?
Perform [Reset Wi-Fi Settings] from the Setup menu. This will restore the Wi-Fi setting to its original state, allowing you to reconfigure the Wi-Fi settings.
How to delete scenes on Panasonic Camcorder?
To delete scenes on your Panasonic Camcorder, first release the protect setting. If scenes/still pictures where the thumbnails are displayed as cannot be deleted, and the scenes/still pictures are unnecessary, format the media to erase the data. Be aware that formatting will erase all data, so back up important data to a PC or disc.
Why does the color or brightness change, or show horizontal bars on my Panasonic HC-V550?
Changes in color or brightness, or horizontal bars, can occur when recording under fluorescent, mercury, or sodium lighting. This is not a malfunction. When recording motion pictures, use Intelligent Auto Mode/Intelligent Auto Plus Mode or set the shutter speed to 1/60 in areas with a 60 Hz power supply, or 1/100 in areas with a 50 Hz supply. This issue does not affect still picture recording.
How to fix Panasonic HC-V550 Camcorder when Auto Focus function does not work?
Switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you are recording a scene that is difficult to focus on in Auto Focus Mode, use Manual Focus Mode to manually adjust the focus.
What to check if images or sounds are not output from Panasonic HC-V550 connected to TV by the HDMI mini cable?
If you're not getting images or sounds when your Panasonic Camcorder is connected to the TV via HDMI mini cable, ensure the HDMI mini cable is correctly and fully inserted.
What to do if my Panasonic HC-V550 SD card is not recognized in another device?
Ensure that the other device supports the capacity and type of SD card you are using (SD Memory Card/SDHC Memory Card/SDXC Memory Card). Consult the device's operating instructions for compatibility details.
General