Playback – Thumbnail operation
227
Display of the clips in the thumbnail screen
* Displayed when using .
1 Thumbnail number
Displays the thumbnail number in [0001] to [9999].
Normally, the number assigned to the clip in the order of recording is displayed.
2 Resume play status
3 Number of recording pixels, system frequency
4 Recording file format, recording codec
5 Protection status of the clip
This is displayed when the clip is protected.
6 Standard time code/clip name
The first 8 digits for the time code when starting shooting of a clip or the file name of the clip are displayed in alphanumeric.
The information to display is set in the [THUMBNAIL] menu ¨ [DISPLAY] ¨ [DATA].
7 Delete selection status
8 Clip that cannot be played back
This is displayed when the clip cannot be played back with the unit because the system frequency is different, etc.
9 Copy selection status
This is displayed when the clip is selected.
10 Dual codec recording
*
Displayed on clips (main recording/sub recording) that used dual codec recording.
Display of clip information
Displays the information of the clip where the cursor is positioned.
1
Move the yellow cursor to the clip to display the clip information.
2
Select the [THUMBNAIL] menu ¨ [CLIP] ¨ [INFORMATION].
The clip information is displayed.
フビパ ヒブパ
ヶラュ ブペハペフ
0001
00:00:00.00
フビパ ヒパパ
ヶラュ ビペハペヘ
0001
00:00:00.00
10
フビパ ヒブパ
ヶラュ ブペハペフ
0001
00:00:00.00
モヷヤラュ ヱラ
ョラュ ブペハペフ
0001
00:00:00.00
2
7
1
8
93
4
6
5
To Next Page
Loading...
