Playback – Thumbnail operation
228
Clip information
* Displayed when using .
1 Clip that cannot be played back
This is displayed when the clip cannot be played back with the unit because the system frequency is different, etc.
2 Thumbnail number
3 Protect status of the clip
:
This is displayed when the clip is protected.
D
*
:
Displayed on clips (main recording/sub recording) that used dual codec recording.
4 Thumbnail image
5 Clip name
6 [START TC]
Displays the time code value at the start of the recording.
7 [START UB]
Displays the user bits value at the start of the recording.
8 [DATE]
Displays the date of the recording.
9 [TIME]
Displays the time at the start of recording.
10 [DURATION]
Displays the time length of the clip.
11 [PIXEL/FREQ]
Displays the recording format of the clip.
12 [CODEC]
Displays the recording file format and the recording codec of the clip.
13 [FRAME RATE]
Displays the recording frame rate of the clip.
• Displays when the variable frame rate recording function is enabled and the clip is recorded in a frame rate different from
the system frequency.
• Displays the frame rate for super slow recording.
14 [GAMMA]
Displays the gamma of the clip.
• Displayed when the [SYSTEM] menu ¨ [FILE FORMAT] is set to other than [AVCHD].
123
6
45
7
8
9
10
11
12
13
14
'
To Next Page
Loading...
