Screen status display – Screen display during shooting
247
7 High-sensitivity mode
[H.SENS.]:
Displayed when set to the [SYSTEM] menu ¨ [SHOOTING MODE] ¨ [HIGH SENS.].
8 External equipment recording operation control status (<SDI OUT>/<HDMI> terminal)
Displays the control status of the recording start and recording stop on the external equipment connected to the <SDI OUT>
terminal and the <HDMI> terminal.
[S/H]
*
:
Recording instruction is output to the output from the <SDI OUT> terminal/<HDMI> terminal.
[S/H]
*
:
Pause instruction is output to the output from the <SDI OUT> terminal/<HDMI> terminal.
[SDI]
*
:
Recording instruction is output to the output from the <SDI OUT> terminal.
[SDI]
*
:
Pause instruction is output to the output from the <SDI OUT> terminal.
[ HDMI]:
Recording instruction is output to the output from the <HDMI> terminal.
[HDMI]:
Pause instruction is output to the output from the <HDMI> terminal.
9 Special recording function
Displays the status of special recording function.
[INTRVL]:
The interval recording is stopped.
[I-REC]:
The interval recording is in progress. (Displayed in red)
10 2-slot function
Displays the setting status of the recording function using 2 memory cards.
It is displayed with a slanted line if it is in a condition that cannot perform 2-slot recording even if each function is enabled.
[RELAY]:
When the relay recording is enabled
[SIMUL]:
When the simultaneous recording is enabled
[BACKGR]:
When the background recording is enabled
[DUAL 50M]
*
:
When dual codec recording is enabled and [DUAL CODEC SETTING] is [FHD 50Mbps]
[DUAL 8M]
*
:
When dual codec recording is enabled and [DUAL CODEC SETTING] is [FHD 8Mbps]
(No display):
During standard recording
11 Flash band compensation function
[FBC]:
Displayed when the flash band compensation function is operating.
12 Streaming status
Displays the streaming status.
To Next Page
Loading...
