V
Vicki OrtizSep 2, 2025
What to do if Panasonic HDC-SD80 is not detected by other devices when connected by USB cable?
- DDr. Carly CrawfordSep 2, 2025
When connected to other devices using only the battery, reconnect using the AC adaptor.
To Next PageTo Next PageWhat to do if Panasonic HDC-SD80 is not detected by other devices when connected by USB cable?
When connected to other devices using only the battery, reconnect using the AC adaptor.
What to do if SD card is not recognized in another device from Panasonic Camcorder?
Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/ SDXC Memory Card) that you inserted.
Why scenes or still pictures cannot be played back on Panasonic HDC-SD80 Camcorder?
Any scenes/still pictures where the thumbnails are displayed as cannot be played back.
How to fix auto focus if it does not work on Panasonic Camcorder?
Switch to Intelligent Auto Mode. If you are trying to record a scene which is hard to bring into focus in Auto Focus Mode, use the Manual Focus Mode to adjust the focus.
What to do if Panasonic Camcorder cannot be operated or does not operate normally?
Remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the unit again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
What to do if my Panasonic Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
The unit has automatically detected an error. Restart the unit by turning it off and on. If the error is repeatedly displayed even after restarting, repair is needed. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
How to fix remaining battery indication if it is not displayed properly on Panasonic HDC-SD80 Camcorder?
If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again.
Why won't my Panasonic Camcorder turn on or stay on?
Charge the battery again to ensure it is sufficiently charged. In cold places, the battery using time becomes shorter. The battery has a limited life. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced.
General| Digital zoom | 2000 x |
|---|---|
| Optical zoom | 34 x |
| Image stabilizer | Yes |
| Focal length range | 2.38 - 81 mm |
| Focal length (35mm film equivalent) | 33.7 - 1240 mm |
| Sensor type | MOS |
| Total megapixels | 1.5 MP |
| Optical sensor size | 1/5.8 \ |
| Effective megapixels (movie) | 1.3 MP |
| Interface | USB 2.0 |
| Video out | 1 |
| Power requirements | AC/DC, 3.6 - 5.0 V |
| Power consumption (typical) | 7.7 W |
| Display diagonal | 2.7 \ |
| Maximum video resolution | 1920 x 1080 pixels |
| Image formats supported | JPG |
| Still image resolution(s) | 1856 x 1392 |
| Audio system | Dolby Digital |
| Camera shutter speed | 1/25 - 1/8000 s |
| Shutter speed (photo) | 1/25 s |
| Shutter speed (video) | 1/8000 s |
| Minimum illumination | 1 lx |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatible memory cards | SD, SDHC, SDXC |
| Product color | Brown |
| Bundled software | HD Writer AE 3.0 |
Weight and Dimensions| Depth | 109 mm |
|---|---|
| Width | 51.5 mm |
| Height | 59 mm |
| Weight | 192 g |
