Panasonic HDC-TM300 - Selecting a Mode (Turning the Unit On;Off)

28
VQT1Z27
Preparation
Setup
3
Selecting a mode
(Turning the unit on/off)
Change the mode to recording, playback or power OFF.
Turn on the power by changing the mode to , or while pressing
the lock release button A.
The status indicator lights.
To turn off the power
Change the mode to OFF.
The status indicator goes off.
HDC-TM300
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with the mark B.
≥ Status indicator C.
OFF
HDC-HS300
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with the mark B.
≥ Status indicator C.
Motion picture recording mode (l 49)
Still picture recording mode (l 53)
Playback mode (l 84, 91)
OFF
HDCTM300&HS300EB-VQT1Z27_mst.book 28 ページ ２００９年１月２１日 水曜日 午後３時７分