Panasonic HDC-TM300 - Recording Manually by Setting White Balance, Shutter Speed or Iris Adjustment

79
VQT1Z27
Recording
Recording
(Advanced)
3
Recording manually by setting white
balance, shutter speed or iris adjustment
The operation sequence differs for the LCD monitor and viewfinder.
¬Change the mode to or .
Press the FUNCTION button.
≥ appears on the screen.
A When using the viewfinder, rotate the multi manual ring to set it.
∫ When using the LCD monitor
1 Touch the desired item to be set.
2 Touch / to enter the
selection.
≥ Press the FUNCTION button again to cancel
manual setting.
≥ Rotate the multi manual ring to operate the
zoom.
≥ The manual icon appears or disappears each
time is touched.
∫ When using the viewfinder
1 Press the FUNCTION button to
select desired item.
≥ Selected item changes whenever the
FUNCTION button is pressed.
2 Set it by rotating the multi
manual ring.
≥ It will switch as following when the is
selected and multi manual ring is rotated.
Press the FUNCTION button to enter the
selection.
[ENTER]: Setting is completed and manual
icon will disappear.
[RETRY]: Setting will be done again.
[CANCEL]: Cancels the manual setting.
≥ Zoom operation cannot be done using the multi
manual ring during setting.
MNL

FUNCTION
F
IRISSHTRWB
White balance (l 80)
Manual shutter speed (l 81)
Aperture adjustment (l 81)
WB
SHTR
IRIS
F
IRISSHTRWB
F
IRISSHTRWB
1/1001001/100
F
F
1/1001/1001/100
IRISSHTR
WB
HDCTM300&HS300EB-VQT1Z27_mst.book 79 ページ ２００９年１月２１日 水曜日 午後３時７分