72
VQT1Z27
Function Effect/Setting method
Digital cinema colour
Recording motion pictures with more vivid colours, using
x.v.Colour
™
technology.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. (l 45)
Select the menu. (l 31)
[RECORD SETUP] # [Digital Cinema Colour] # [ON]
≥ For more realistic colours, use an HDMI mini cable with a TV that
supports the x.v.Colour
™
.
≥ When connecting this unit to a TV with the component cable or
A/V cable, the TV cannot detect the digital cinema colour setting
on this unit automatically. We recommend connecting this unit to
TVs compatible with x.v.Colour
™
using an HDMI mini cable.
≥ When viewing on the TV with the digital cinema colour function,
turn off the digital cinema colour function on the TV.
Wind noise reduction
This is for reducing the wind noise coming into the built-in
microphones depending on the wind strength.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. (l 45)
Select the menu. (l 31)
[RECORD SETUP] # [WIND CUT] # [ON]
≥ This function’s default setting is [ON].
Microphone setup
[SURROUND]:
Sound is recorded with
5.1 ch surround microphone.
[ZOOM MIC]:
Directivity of the microphone
is interlocked with the zoom
operation. Sounds near the
front of the unit are recorded
more clearly if you zoom in
(close-up) and surrounding
sounds are recorded more
realistically if you zoom out
(wide angle).
[FOCUS MIC]:
Directivity of the centre is
enhanced for recording audio
near the front of the unit
more clearly.
Directivity (sound sensitivity direction) of the built-in
microphones can be adjusted.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. (l 45)
Select the menu. (l 31)
[RECORD SETUP] # [MIC SETUP] # desired setting
≥ This function’s default setting is [SURROUND].
HDCTM300&HS300EB-VQT1Z27_mst.book 72 ページ ２００９年１月２１日 水曜日 午後３時７分
To Next Page
Loading...
