EasyManua.ls Logo

Panasonic HG-C1030 - Specifications

Panasonic HG-C1030
7 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
14
Specications
NPN output HG-C1030 HG-C1050 HG-C1100 HG-C1200 HG-C1400
PNP output HG-C1030-P HG-C1050-P HG-C1100-P HG-C1200-P HG-C1400-P
Measurement center
distance
30mm 50mm 100mm 200mm 400mm
Measurement range ±5mm ±15mm ±35mm ±80mm ±200mm
Repeatability 10µm 30µm 70µm 70µm
300µm (measurement distance 200
to 400mm)
800µm (measurement distance 400
to 600mm)
Linearity ±0,1% F.S. ±0,2% F.S.
±0,2% F.S. (measurement distance
200 to 400mm)
±0,3% F.S. (measurement distance
400 to 600mm)
Temperature
characteristic
0.03%F.S./°C
Beam diameter
2
≈ 50µm ≈ 70µm ≈ 120µm ≈ 300µm ≈ 500µm
Light source
Red semiconductor laser class 2 (JIS / IEC / GB) / class II
Max. output: 1mW, emission peak wavelength: 655nm
Supply voltage 12 to 24V DC ±10% including ripple max. 10% (P-P)
Power consumption max. 40mA (at 24V DC supply voltage), max. 60mA (at 12V DC supply voltage)
Control Output
NPN output type:
NPN open collector transistor
Maximum sink current: 50mA
Applied voltage: max. 30V DC
(between control output to 0V)
Residual voltage: max. 1.5V (at 50mA sink current)
Leakage current: max. 0.1mA
PNP output type:
PNP open-collector transistor
Maximum source current: 50mA
Applied voltage: max. 30V DC
(between control output to 0V)
Residual voltage: max. 1.5V (at 50mA source current)
Leakage current: max. 0.1mA
Output operation Selectable either Light-ON or Dark-ON
Short-circuit
protection
Incorporated (auto-reset)
Analog voltage
output
Voltage output: 0 to 5V (Alarm: +5.2V)
Output impedance: 100Ω
Analog current
output
Current output: 4 to +5V (Alarm: 0mA)
Load impedance: max. 250Ω
Response time Switchable between high speed (1.5ms), standard (5ms), and high precision (10ms)
External input
NPN output type:
NPN non-contact input
Input conditions:
Invalid: +8 to +V DC or open
Valid: 0 to +1.2V DC
Input impedance: ≈ 10kΩ
PNP output type:
PNP non-contact input
Input conditions:
Invalid: 0 to +0.6V DC or open
Valid: +4 to +V DC
Input impedance: ≈ 10kΩ
Degree of protection IP67 (IEC)
Degree of pollution 2
Ambient temperature
-10 to +45°C (no dew condensation or icing allowed), storage: -20 to +60°C
Ambient humidity 35 to 85% RH, at storage: 35 to 85% RH
Ambient illumination 3000ℓx max. (Illumination level of light receiving surface under incandescent light)
Operating altitude Max. 2000m
Cable 0.2mm
2
5-core composite cable, 2m long 2m
Material Enclosure: die-cast aluminum, front cover: acrylic
Weight ≈ 35g (without cable), ≈ 85g (including cable)
Applicable standards
EMC Directive
1
Measurement conditions: 24V supply voltage, 20°C ambient temperature,
10ms response time. The subject is white ceramics.
2
This is the size in the measurement center distance. These values were
dened by using 1/e
2
(approx. 13.5%) of the center light intensity. Due to leak
light outside the specied area, the reectance around the detecting point may
be higher than at the point and this may affect the measurement value.
7
Panasonic Industrial Devices SUNX Co., Ltd.
http://panasonic.net/id/pidsx/global
Overseas Sales Dept. (Head Ofce)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Telefon: +81-(0)-568-33-7861 FAX: +81-568-33-8591
Europe Headquarter: Panasonic Electric Works Europe AG
Robert-Koch-Straße 100, D-85521 Otttobrunn, Germany
Telefon: +49-89-45354-1000

Related product manuals